VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1973 Honda CB125S0 — Réservoirs, bouchons, robinets et pièces

Identify the tap on your 1973 CB125S0 before replacing its tank-to-petcock body seal. The featured gasket is for the stock original petcock. A replacement tap or changed tank can use a different connection, even when the motorcycle model matches.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Réservoirs, bouchons, robinets et pièces

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Nouveau
Honda CB750 CB550 CB500 CB350 CB200 fuel petcock gasket 16997-273-006

Honda CB Fuel Petcock Body O-Ring / Gasket ~ Replaces 16997-273-006

$5.50 USD
49-0260
Replace your fuel petcock gasket with this Fuel Petcock Gasket / O-Ring, replacing OEM #16997-273-006 / #16960-011-000. This is the O-ring that goes between...
Honda CB750 CB550 CB450 CB400 CB350 gas cap rubber seal 17631-329-003

Honda CB Gas Cap Rubber Seal ~ Replaces 17631-329-003

$7.95 USD
20-0097
Replace the broad-fitment gas cap rubber seal on many classic Hondas with this Gas Cap Rubber Seal, replacing OEM #17631-329-003. Exceptionally wide fitment covering...
Nouveau
Épuisé
Honda CB1000 CB900 CB750 fuel tank emblem clamp nut 87311-634-600

Honda CB Fuel Tank Emblem Clamp Nut ~ Replaces 87311-634-600

$6.25 USD
99-5267
Secure your fuel tank emblem properly with this Fuel Tank Emblem Clamp Nut, designed as a direct replacement for the original Honda hardware. This...
Nouveau
Honda CB450 CL450 CB350 CB72 gas tank filler cap 17620-402-000

Honda Gas Tank Filler Cap ~ Replaces 17620-402-000

$7.95 USD
07-4647
Restore an early-era Honda with this Chrome Gas Tank Filler Cap (with gasket installed), replacing OEM #17620-402-000 / #17620-402-010. Fits the oldest models in...
Nouveau
Honda CB125S CB100K fuel petcock 16950-107-000

1970-74 Honda CB125S / CB100K Fuel Petcock ~ Replaces 16950-107-000

$21.46 USD
29-0541
Replace your CB100K or CB125S fuel petcock with this Fuel Petcock, replacing OEM #16950-107-000 / #16950-107-005 / #16950-356-005 / #16950-356-700. Single fuel output type...
Comparer

1973 Honda CB125S0 · Tank & Petcock Parts Buying guide

Check the original petcock before selecting its body seal

This seal sits between the petcock body and the tank. Establish which tap and sealing arrangement are installed before ordering, rather than assuming a visually similar replacement tap uses the same gasket.

Parts to consider

Honda CB Fuel Petcock Body O-Ring / Gasket ~ Replaces 16997-273-006 Original-petcock body sealSeal between the petcock body and tank, referencing 16997-273-006 / 16960-011-000. For the stock original petcock.Voir la pièce

Identify the sealing joint

The featured gasket seals the petcock body against the tank. Confirm that this is the joint needing attention before buying it. A leak from another part of the tap requires its own diagnosis and correctly identified service part.

Replacement taps can change the choice

A bike restored with another tank or tap may no longer use the original sealing arrangement. Compare the installed parts and their references. The gasket application expressly calls for the stock original petcock, so an aftermarket tap needs its own compatibility check.

Buying questions

How do I tell whether I need the tank-to-petcock body seal?

Identify the joint needing repair before ordering. This gasket seals between the stock original petcock body and the fuel tank; a leak from another part of the tap needs the appropriate service part for that location.

Will it fit an aftermarket stock-style petcock?

That application is not established. The product specifically calls for a stock original petcock. Check the replacement tap manufacturer’s sealing requirements before ordering a gasket for an aftermarket unit.

Should I buy a seal when replacing the complete tap?

First check the replacement tap’s supplied parts and connection requirements. This gasket is for the supported original petcock, and its availability does not establish which seal a different complete tap needs.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1973 Honda CB125S0

Votre panier

×