VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1970 Honda CB100K0 — Alimentation en carburant

Trace the repair to the tank connection or carburetor before ordering for your 1970 CB100K0. The choices here include a stock-petcock seal, a float with pin and a bowl drain screw with O-ring. Changed fuel hardware needs its own comparison.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Alimentation en carburant

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Nouveau
Honda CB750 CB550 CB500 CB350 CB200 fuel petcock gasket 16997-273-006

Honda CB Fuel Petcock Body O-Ring / Gasket ~ Replaces 16997-273-006

$5.50 USD
49-0260
Replace your fuel petcock gasket with this Fuel Petcock Gasket / O-Ring, replacing OEM #16997-273-006 / #16960-011-000. This is the O-ring that goes between...
Honda CB750 CB500 CB450 CB125 CB100 float valve 16011-302-004

Honda CB Float Valve ~ Replaces 16011-302-004

$9.95 USD
48-5009
Replace your float needle and seat with this Float Valve Set (needle and seat), replacing OEM #16011-302-004 / #16011-375-004.Key Features• Float valve set (needle...
Honda CB750 CB550 CB450 CB400 CB350 gas cap rubber seal 17631-329-003

Honda CB Gas Cap Rubber Seal ~ Replaces 17631-329-003

$7.95 USD
20-0097
Replace the broad-fitment gas cap rubber seal on many classic Hondas with this Gas Cap Rubber Seal, replacing OEM #17631-329-003. Exceptionally wide fitment covering...
Honda CB750 CB550 CB500 CB450 CB400 float bowl drain screw

Honda CB Stock Type Float Bowl Drain Screw

$7.50 USD
48-5041
Replace your stock-type float bowl drain screw with this Float Bowl Drain Screw with O-Ring.Note: sold each, order the quantity you require.Key Features• Stock-type...
Honda CB750 CB450 CB350 CB200 CB175 front cable clip 45465-270-000

Honda CB Front Cable Clip ~ Replaces 45465-270-000

$7.00 USD
73-1116
Keep your wiring clean and secure with this Front Cable Clip, designed to hold the stop switch wires neatly against the front cable. Replaces...
Nouveau
Honda CB450 CL450 CB350 CB72 gas tank filler cap 17620-402-000

Honda Gas Tank Filler Cap ~ Replaces 17620-402-000

$7.95 USD
07-4647
Restore an early-era Honda with this Chrome Gas Tank Filler Cap (with gasket installed), replacing OEM #17620-402-000 / #17620-402-010. Fits the oldest models in...
Nouveau
Honda CB100K carb rebuild kit

1970-72 Honda CB100K Carb Rebuild Kit

$22.95 USD
48-1387
Rebuild your CB100K carb with this Carb Rebuild Kit.Note: each kit rebuilds one carb, order the quantity you require.Key Features• Carb rebuild kit• Rebuilds...
Nouveau
Honda CB125S CB100K fuel petcock 16950-107-000

1970-74 Honda CB125S / CB100K Fuel Petcock ~ Replaces 16950-107-000

$21.46 USD
29-0541
Replace your CB100K or CB125S fuel petcock with this Fuel Petcock, replacing OEM #16950-107-000 / #16950-107-005 / #16950-356-005 / #16950-356-700. Single fuel output type...
Honda CB350 CB125 CB100 CB77 CB72 carb float 16013-286-014

Honda CB Carb Float ~ Replaces 16013-286-014

$22.95 USD
20-6500
Replace your carb float with this Carb Float with Pin, replacing OEM #16013-286-014. Fits the CB350F 1973, CB350K/CL350K/SL350, and the earliest classics including CB72/CB77...
Comparer

1970 Honda CB100K0 · Fuel System Buying guide

Choose parts for the repair location

A tank-to-petcock seal, carburetor float and bowl drain screw address different parts of the fuel system. Identify the fitted hardware first, then use the stated application and contents to shape your order.

Parts to consider

Honda CB Fuel Petcock Body O-Ring / Gasket ~ Replaces 16997-273-006 Stock petcock body sealStock-OEM petcock-to-tank gasket; references 16997-273-006 and 16960-011-000.Voir la pièce Honda CB Carb Float ~ Replaces 16013-286-014 Carburetor float with pinFloat supplied with a pin; reference 16013-286-014. Sold each for the 1970–72 CB100K.Voir la pièce Honda CB Stock Type Float Bowl Drain Screw Float bowl drain screw with O-ringStock-type bowl drain screw supplied with an O-ring. Sold each for the 1970–72 CB100K.Voir la pièce

Keep the tank seal tied to the petcock

The body seal sits between the fuel petcock and tank and is specified for a stock OEM petcock. The separately offered replacement petcock has a longer body and a differently positioned outlet on some models. Do not transfer the stock seal application to that replacement by assumption.

Order carburetor parts by their supplied contents

The float is supplied with a pin, and the stock-type drain screw is supplied with an O-ring. Both are sold each. Compare the fitted carburetor before ordering, then use the service manual for inspection and setup rather than treating replacement parts as a diagnosis.

Buying questions

Can I use the stock seal on a replacement petcock?

Only choose this seal after confirming a stock OEM petcock. An aftermarket replacement can have a different sealing arrangement, even when the complete petcock is offered for the same motorcycle.

What is included with the float and drain screw?

The float comes with a pin; the drain screw comes with an O-ring. Each product is sold individually, so select the required quantity for the repair rather than assuming a multi-part set.

Will these carburetor parts fit a swapped carburetor?

The float and drain screw include the 1970–72 CB100K in their application. A swapped carburetor needs a separate identification check before that motorcycle-level application can be used to choose its internals.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1970 Honda CB100K0

Votre panier

×