VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1978 Honda CB750K — Pignons et couronnes

Check the drivetrain fitted to your 1978 Honda CB750K before choosing sprockets. The listed replacements are a 15-tooth front and a 41-tooth rear for a 630-chain setup. Count the installed teeth and compare chain details because previous changes may alter the required parts.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Pignons et couronnes

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 rear sprocket washer set 94108-17000

1969-78 Honda CB750 Rear Sprocket Washer Set

$9.50 USD
29-7012
Replace your rear sprocket lock washers with this Rear Sprocket Tongued Lock Washer 2-pack, replacing OEM #94108-17000.Key Features• Rear sprocket tongued lock washer, 2-pack•...
Honda CB750A CB750F CB750K rear sprocket bolt and nut set 90128-341-000

1972-78 Honda CB750A / CB750F / CB750K Rear Sprocket Bolt & Nut Set ~ Replaces 90128-341-000

$13.95 USD
29-7023
Restore your rear sprocket hardware with this Rear Sprocket Stud Bolt (12 x 54) & Nut Set. Set includes 4 stud bolts and 4...
Honda CB750K steel front sprocket 15 tooth x 630 23801-405-010

1977-78 Honda CB750K Steel Front Sprocket ~ 15 Tooth X 630 ~ Replaces 23801-405-010

$34.95 USD
23-0403
Replace your late-'70s CB750K front sprocket with this Steel Front Sprocket, 15 tooth, for 630 chain setup as came stock. Replaces OEM #23801-405-010.Please count...
Nouveau
Honda CB750 primary chain tensioner

1969-78 Honda CB750 Primary Chain Tensioner ~ Genuine Honda Brand

$219.95 USD
99-5460
Upgrade or restore your classic Honda motorcycle with this Primary Chain Tensioner — a genuine Honda brand part engineered for correct fit and dependable...
Honda CB750K steel rear sprocket 41 tooth x 630 type 41201-405-000

1977-78 Honda CB750K Steel Rear Sprocket ~ 41 Tooth X 630 Type ~ Replaces 41201-405-000

$59.95 USD
22-0304
Replace your late-'70s CB750K rear sprocket with this Steel Rear Sprocket, 41 tooth, for 630 chain setup. Replaces OEM #41201-405-000.Please count your sprocket teeth...
Comparer

1978 Honda CB750K · Sprockets Buying guide

Compare the installed chain and both sprockets

The front and rear listings identify tooth counts and chain application. Mounting studs, nuts and lock washers are additional choices, so check both compatibility and package contents before ordering.

Parts to consider

1977-78 Honda CB750K Steel Front Sprocket ~ 15 Tooth X 630 ~ Replaces 23801-405-010 15-tooth steel front sprocketListed for the 1977–78 CB750K and a 630-chain setup; the description asks buyers to check teeth and chain length.Voir la pièce 1977-78 Honda CB750K Steel Rear Sprocket ~ 41 Tooth X 630 Type ~ Replaces 41201-405-000 41-tooth steel rear sprocketListed rear sprocket for the same stated model application and 630-chain setup.Voir la pièce 1972-78 Honda CB750A / CB750F / CB750K Rear Sprocket Bolt & Nut Set ~ Replaces 90128-341-000 Rear sprocket stud and nut setPackage lists four stud bolts and four nuts for the described rear sprocket mounting connection.Voir la pièce

Pièces connexes : Rear sprocket tongued lock washer pair

Verify gearing on the motorcycle

The two sprocket listings both ask buyers to count teeth and check chain length. Compare the actual fitted chain and sprockets, particularly if the motorcycle has undergone a conversion or previous gearing change. The model label alone does not identify the current drivetrain configuration.

Account for mounting pieces separately

The rear stud-and-nut package lists four of each component. The tongued lock washers are supplied in a separate two-pack. Read those contents against the hardware being replaced, and do not assume either sprocket purchase includes every fastener used at its mounting location.

Common questions

Which tooth counts are listed for this route?

The featured front sprocket has 15 teeth and the rear has 41, with both descriptions stating a 630-chain application for the 1977–78 CB750K. Compare the fitted drivetrain and chain length before choosing those replacements.

Will these suit a different chain conversion?

Their descriptions specifically name a 630-chain setup. If the fitted bike uses a different arrangement, compare the conversion components and intended sprockets rather than relying on the motorcycle year. Confirm the application when any part of the setup is unknown.

Does the rear hardware set include lock washers?

The rear stud-and-nut set lists four stud bolts and four nuts. The tongued lock washers are a separate two-pack. Compare both package descriptions with the mounting hardware required for the repair before adding individual components.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1978 Honda CB750K

Votre panier

×