VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1978 Honda CB750K — Outils pour fourche et suspension

The tools here cover fork seal installation and removal of the fork caps. For a 1978 CB750K, read the measurement named by each tool: the driver’s fork application and the cap wrench’s hex size are different checks before beginning the job.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Outils pour fourche et suspension

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB650 CB550 CB500 35 36mm fork seal driver

Honda CB750 / CB650 / CB550 / CB500 35/36mm Fork Seal Driver

$49.95 USD
35-4299
Install 35mm or 36mm fork seals cleanly with this 35/36mm Fork Seal Driver. High-quality carbon steel with split design. Use for easy installation of...
Honda CB750 CB550 fork cap wrench 24mm

Honda CB750 / CB550 Fork Cap Wrench ~ 24mm

$7.00 USD
35-9116
Remove 24mm fork caps without damage with this 24mm Non-Marring Fork Cap Wrench. Fits all motorcycles with 24mm fork caps. Lets you remove fork...
Comparer

1978 Honda CB750K · Fork & Suspension Tools Buying guide

Read the fork-size and cap-size specifications separately

The split driver is listed for 35mm or 36mm fork applications, while the featured wrench is listed for 24mm caps. Confirm both against the installed components instead of combining the measurements.

Parts to consider

Honda CB750 / CB650 / CB550 / CB500 35/36mm Fork Seal Driver Split 35/36mm seal driverSplit-design fork seal driver listed for 35mm and 36mm fork applications; verify the installed fork diameter.Voir la pièce Honda CB750 / CB550 Fork Cap Wrench ~ 24mm 24mm non-marring cap wrenchA wrench described for 24mm fork-cap hexes. Check the caps fitted before selecting it.Voir la pièce

A fork diameter is not a cap hex measurement

The driver specification and cap-wrench specification refer to different features. Check the actual tube application for the driver and the cap hex for the wrench. Replacement forks or caps can change those checks, so do not treat a model label as the only selection information.

Separate equipment from the parts being replaced

The driver and wrench are workshop tools. Neither listing describes a replacement seal kit, cap or dust boot as included. Build the service-parts order separately, then compare these tools with the assembly you will be working on and the product instructions.

Common questions

Which measurement chooses the cap wrench?

The cap wrench is selected by the cap hex size stated in its description. The featured wrench names 24mm caps. Measure the cap on the motorcycle rather than choosing a wrench from the fork tube diameter.

What fork applications does the driver list?

The driver description names 35mm and 36mm fork applications and a split design. Compare the installed fork diameter with those stated applications before purchasing, particularly where the motorcycle’s original forks have been replaced.

Does buying the driver also supply new seals?

The listing describes the driver tool and its applications. It does not list replacement fork seals as contents. Select the correct seals from their own description and keep that service-parts purchase separate from the tool choice.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1978 Honda CB750K

Votre panier

×