VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1978 Honda CB750K — Outils pour moteur, direction et embrayage

Clutch sockets, fork equipment, a rotor puller and a bench stand share this route with a spin-on filter wrench. Each tool is intended for a particular task. Choose after identifying the fitted assembly, especially where an owner has changed forks or filtration.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Outils pour moteur, direction et embrayage

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB1100 CB1000 CB900 CB750 CB450 clutch center nut removal tool

Honda CB Clutch Center Nut Removal Tool

$15.10 USD
35-0051
Remove your clutch center nut without damage with this Clutch Center Nut Removal Tool, the perfect tool for easier removal and fitting without damaging...
Honda CB1100 CB1000 CB900 CB750 clutch center nut removal tool premium

Honda CB Clutch Center Nut Removal Tool ~ Premium

$26.95 USD
35-0076
Remove clutch center nuts on different bikes with this Premium Clutch Center Nut Removal Tool, the perfect tool for easier removal and fitting without...
Honda CB750 SOHC alternator rotor puller

1969-78 Honda CB750 SOHC Alternator Rotor Puller

$12.95 USD
35-0030
Pull your SOHC CB750 alternator rotor with this Alternator Rotor Puller, 20mm x M1.5 right-hand thread, for internal-thread rotors.Key Features• Alternator rotor puller• 20mm...
Honda CB1100 CB1000 CB900 CB750 oil filter wrench

Honda CB1100/CB1000/CB900/CB750 Oil Filter Wrench

$14.95 USD
35-9022
Remove and install spin-on oil filters with this 3/8" Drive Tripod Oil Filter Wrench. Designed for our aftermarket spin-on cartridge oil filters.Key Features• 3/8"...
Honda CB750 CB650 CB550 CB500 35 36mm fork seal driver

Honda CB750 / CB650 / CB550 / CB500 35/36mm Fork Seal Driver

$49.95 USD
35-4299
Install 35mm or 36mm fork seals cleanly with this 35/36mm Fork Seal Driver. High-quality carbon steel with split design. Use for easy installation of...
Épuisé
Honda CB750 engine rebuild stand for Honda CB750 SOHC

1969-78 Honda CB750 Engine Rebuild Stand ~ For Honda CB750 SOHC

$144.95 USD
73-1162
Streamline your engine rebuild with this high-quality CB750 SOHC Engine Rebuild Stand. Built to handle the weight and shape of the Honda CB750 SOHC...
Honda CB750 CB550 fork cap wrench 24mm

Honda CB750 / CB550 Fork Cap Wrench ~ 24mm

$7.00 USD
35-9116
Remove 24mm fork caps without damage with this 24mm Non-Marring Fork Cap Wrench. Fits all motorcycles with 24mm fork caps. Lets you remove fork...
Universal motorcycle fork cap wrench 35mm

Universal Motorcycle Fork Cap Wrench ~ 35mm

$7.00 USD
35-9113
Fork Cap Wrench ~ 35MM Size for custom or restoration work on classic Honda CB motorcycles.  Key Features Aftermarket part Sold as: Each Fitment...
Voir les détails
Comparer

1978 Honda CB750K · Engine, Steering & Clutch Tools Buying guide

Keep engagement size and drive size on the same list

A clutch tool must engage the nut and accept your driver. Fork-cap wrench size is a different measurement from fork diameter. The filter wrench also has a specific aftermarket spin-on application to verify.

Parts to consider

Honda CB Clutch Center Nut Removal Tool 24mm clutch center-nut toolA clutch nut service tool specified with a 24mm inside diameter and a 3/8-inch driver connection.Voir la pièce Honda CB750 / CB650 / CB550 / CB500 35/36mm Fork Seal Driver Split 35/36mm fork seal driverThe split-design driver has 35mm and 36mm applications; its CB750K listing identifies 35mm forks.Voir la pièce Honda CB1100/CB1000/CB900/CB750 Oil Filter Wrench Tripod wrench for spin-on filtersA 3/8-inch drive wrench described for the store’s aftermarket spin-on cartridge filters, rather than every filter arrangement.Voir la pièce

Pièces connexes : 20mm/24mm clutch tool option · Wrench for the listed stock 24mm fork caps · SOHC engine bench stand

Compare dimensions without combining them

The standard clutch tool specifies 24mm inside diameter and 3/8-inch drive. The alternative lists 20mm and 24mm ends with a 1/2-inch extension connection. For fork work, the detailed cap-wrench listing identifies stock 24mm caps; the seal-driver application refers instead to 35mm forks.

Account for components that have been changed

A model application cannot describe every fork or filter conversion fitted over decades. The tripod wrench listing is specifically for aftermarket spin-on filters. Compare the filter arrangement actually fitted before choosing the tool.

Buying questions

Does the seal driver size determine the cap wrench size?

No. The seal-driver application describes fork size, while the cap wrench engages the cap. The listings identify 35mm forks and stock 24mm caps for this model. Compare both independently if the fork assembly has been modified.

Is an extension bar supplied with the dual-ended clutch tool?

The description refers to use with a 1/2-inch drive extension bar but does not clearly itemize a separate bar as supplied contents. Confirm that point before ordering if you need a tool-and-driver package.

Can the tripod wrench service the original filter arrangement?

The verified application is the store’s aftermarket spin-on cartridge filter. The description does not establish it as a tool for the original filter assembly. Identify your installed filter before choosing this wrench for an oil-service job.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1978 Honda CB750K

Votre panier

×