VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1977 Honda CB750K — Supports, caoutchoucs et fixations

Repair the supports or outer cases of the 1977 Honda CB750K gauges with the appropriate cushion, nut, glass or ring. Mounting hardware and internal restoration pieces are different repairs. Inspect the fitted cluster and trip reset position before ordering by a similar gauge photograph.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Supports, caoutchoucs et fixations

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB900 CB750 speedo tach cap nut set 4

Honda CB900 / CB750 Speedo/Tach Cap Nut Set/4

$3.50 USD
49-0785
Mount your stock speedo and tach with this Speedo / Tach Cap Nut Set of 4. Used to mount the stock OEM-type speedometer and...
Honda CB750 CB550 CB500 speedometer tachometer internal rubber seal

Honda CB750 / CB550 / CB500 Speedometer / Tachometer Internal Rubber Seal

$11.95 USD
49-0255
Replace your gauge internal seal with this Speedometer / Tachometer Internal Rubber Seal. Replaces the ripped, dried, or missing rubber internal seal.Key Features• Speedo...
Épuisé
Honda CB chrome speedometer and tachometer cover set

Honda CB Chrome Speedometer & Tachometer Cover Set

$44.95 USD
02-2480
Dress up your gauge cluster with this Chrome Speedometer & Tachometer Cover Set. These chrome-plated covers fit over your stock speedo and tach to...
Honda CB900 CB750 CB650 CB550 speedo tach meter cushion 37235-323-700

Honda CB Speedo/Tachometer Meter Cushion ~ Replaces 37235-323-700

$22.26 USD
73-0096
Replace your speedo / tach meter cushion with this Speedo / Tachometer Meter Cushion, replacing OEM #37235-323-700.Note: 2 used per bike, one for the...
Épuisé
Honda CB750F CB750K speedometer and tachometer crimp ring set 2

1971-78 Honda CB750F / CB750K Speedometer & Tachometer Crimp Ring Set/2

$59.95 USD
49-0249
Restore your gauge faces with this Speedometer & Tachometer Crimp Ring Set of 2. When changing the speedometer or tachometer faceplates, these rings are...
Honda CB750 CB550 CB500 speedometer and tachometer replacement glass lens set 2

Honda CB750 / CB550 / CB500 Speedometer & Tachometer Replacement Glass Lens Set/2

$44.95 USD
49-0250
Replace scratched or broken gauge glass with this Speedometer & Tachometer 92mm Glass Lens Set of 2. If the glass lens of your gauges...
Nouveau
Honda CB900 CB750 CB650 CB550 Honda tachometer chrome back cover plate 37246-426-000

Honda CB900 / CB750 / CB650 / CB550 Genuine Honda Tachometer Chrome Back Cover Plate ~ OEM 37246-426-000

$69.95 USD
99-5072
Upgrade or restore your classic Honda motorcycle with this Genuine Honda Tachometer Chrome Back Cover Plate — precision‑engineered and quality made in Japan. This...
Honda CB750F CB750K CB550K two metal speedo tach gauge covers with crimp rings

1971-78 Honda CB750F / CB750K / CB550K Two Metal Speedo / Tach Gauge Covers With Crimp Rings

$199.95 USD
49-0252
Recondition your gauges with this Two Metal Speedo / Tach Gauge Covers with Crimp Rings set. Metal gauge covers are often dented, scratched, and...
Nouveau
Honda CB900 CB750 CB650 CB550 Honda speedometer chrome back cover plate 37236-426-000

Honda CB900 / CB750 / CB650 / CB550 Genuine Honda Speedometer Chrome Back Cover Plate ~ OEM 37236-426-000, 37236-393-008

$69.95 USD
99-5253
Upgrade or restore your classic Honda motorcycle with this Genuine Honda Speedometer Chrome Back Cover Plate — precision‑engineered and made in Japan. This authentic...
Comparer

1977 Honda CB750K · Mounts, Rubbers & Hardware Buying guide

Distinguish loose mounting from a damaged gauge case

The meter cushion and cap nuts work at the mounting, while glass, seals and crimp rings belong to gauge restoration. Identify the damaged component before deciding which parts require the instrument to be opened.

Parts to consider

Honda CB Speedo/Tachometer Meter Cushion ~ Replaces 37235-323-700 Individual speedo or tach cushionReferenced to 37235-323-700; one is listed for each gauge, two used per motorcycle.Voir la pièce Honda CB900 / CB750 Speedo/Tach Cap Nut Set/4 Four stock-type gauge cap nutsSet of four mounting nuts referenced to 94021-06020 for the speedometer and tachometer.Voir la pièce Honda CB750 / CB550 / CB500 Speedometer & Tachometer Replacement Glass Lens Set/2 Pair of 92mm glass lensesTwo slightly curved replacement glass lenses for repairing the speedometer and tachometer.Voir la pièce

Pièces connexes : Two replacement gauge crimp rings · Internal rubber seal for stock-type ND gauges · Black metal cases supplied with rings

Count each package for the repair it performs

The meter cushion replaces 37235-323-700 and supports an individual instrument. The four mounting nuts replace 94021-06020. Compare those mounting parts with the separate glass, internal seal and case pieces before choosing the repair scope.

Compare the case and reset details before restoration

The replacement metal cases are semi-gloss black and supplied with crimp rings. Their description warns that a side tripmeter-reset opening is absent and must be drilled if needed. Compare the original case first, including its reset position, rather than assuming the new case needs no preparation.

Mounts, Rubbers & Hardware: buying questions

Which gauge identification matters when ordering the internal rubber seal?

The seal listing specifies stock-type Honda CB750 ND-brand gauges. Check the instrument actually fitted, especially after a gauge replacement; the motorcycle’s year and a similar face do not establish that a different-brand housing uses this seal.

Should I add the separate crimp-ring pair when buying replacement black cases?

The two black metal cases already include crimp rings. A separate ring pair is useful when retaining suitable cases, with listed inside and outside diameters of 102.7 mm and 107.5 mm. Compare the chosen package before buying duplicate rings for the same restoration.

How do the black cases and chrome over-covers differ at the trip reset?

The black replacement cases lack the side trip-reset opening and require drilling if that opening is needed. Chrome over-cover set 02-2480 instead lists a small trip-reset cutout in one cover and fits over retained stock instruments. Compare the repair type and reset position before choosing by finish alone.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1977 Honda CB750K

Votre panier

×