VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1977 Honda CB750K — Outils pour moteur, direction et embrayage

Choose the 1977 Honda CB750K workshop tool by the clutch nut, alternator rotor or fork component being serviced. Standard and premium clutch tools use different driver connections. Puller threads and fork working sizes need their own checks against the parts actually installed.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Outils pour moteur, direction et embrayage

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB1100 CB1000 CB900 CB750 CB450 clutch center nut removal tool

Honda CB Clutch Center Nut Removal Tool

$15.10 USD
35-0051
Remove your clutch center nut without damage with this Clutch Center Nut Removal Tool, the perfect tool for easier removal and fitting without damaging...
Honda CB1100 CB1000 CB900 CB750 clutch center nut removal tool premium

Honda CB Clutch Center Nut Removal Tool ~ Premium

$26.95 USD
35-0076
Remove clutch center nuts on different bikes with this Premium Clutch Center Nut Removal Tool, the perfect tool for easier removal and fitting without...
Honda CB750 SOHC alternator rotor puller

1969-78 Honda CB750 SOHC Alternator Rotor Puller

$12.95 USD
35-0030
Pull your SOHC CB750 alternator rotor with this Alternator Rotor Puller, 20mm x M1.5 right-hand thread, for internal-thread rotors.Key Features• Alternator rotor puller• 20mm...
Honda CB1100 CB1000 CB900 CB750 oil filter wrench

Honda CB1100/CB1000/CB900/CB750 Oil Filter Wrench

$14.95 USD
35-9022
Remove and install spin-on oil filters with this 3/8" Drive Tripod Oil Filter Wrench. Designed for our aftermarket spin-on cartridge oil filters.Key Features• 3/8"...
Honda CB750 CB650 CB550 CB500 35 36mm fork seal driver

Honda CB750 / CB650 / CB550 / CB500 35/36mm Fork Seal Driver

$49.95 USD
35-4299
Install 35mm or 36mm fork seals cleanly with this 35/36mm Fork Seal Driver. High-quality carbon steel with split design. Use for easy installation of...
Épuisé
Honda CB750 engine rebuild stand for Honda CB750 SOHC

1969-78 Honda CB750 Engine Rebuild Stand ~ For Honda CB750 SOHC

$144.95 USD
73-1162
Streamline your engine rebuild with this high-quality CB750 SOHC Engine Rebuild Stand. Built to handle the weight and shape of the Honda CB750 SOHC...
Honda CB750 CB550 fork cap wrench 24mm

Honda CB750 / CB550 Fork Cap Wrench ~ 24mm

$7.00 USD
35-9116
Remove 24mm fork caps without damage with this 24mm Non-Marring Fork Cap Wrench. Fits all motorcycles with 24mm fork caps. Lets you remove fork...
Universal motorcycle fork cap wrench 35mm

Universal Motorcycle Fork Cap Wrench ~ 35mm

$7.00 USD
35-9113
Fork Cap Wrench ~ 35MM Size for custom or restoration work on classic Honda CB motorcycles.  Key Features Aftermarket part Sold as: Each Fitment...
Voir les détails
Comparer

1977 Honda CB750K · Engine, Steering & Clutch Tools Buying guide

Match the special tool to its working connection

A socket’s driver size, a puller’s thread and a fork wrench’s working size are different specifications. Confirm each at the assembly being serviced before selecting equipment or treating the model name alone as a complete tool specification.

Parts to consider

Honda CB Clutch Center Nut Removal Tool 24mm clutch center nut tool24mm inside diameter with a 3/8-inch driver connection; a service tool, not a replacement nut.Voir la pièce 1969-78 Honda CB750 SOHC Alternator Rotor Puller SOHC alternator rotor pullerRight-hand threaded puller for the listed internally threaded SOHC CB750 rotor; confirm the diameter and pitch with the seller.Voir la pièce Honda CB750 / CB550 Fork Cap Wrench ~ 24mm 24mm fork cap wrenchNon-marring tool listed for stock-type 24mm CB750 fork caps; compare the cap actually fitted.Voir la pièce

Pièces connexes : 20/24mm premium half-inch-drive clutch tool · Split driver for 35/36mm fork seals · Workbench-mounted SOHC engine stand

Check the clutch nut profile before choosing a socket

Both clutch tools list the 1977 CB750K application. Compare the actual nut and working profile first, particularly on a changed clutch assembly, then choose the appropriate driver connection. Follow the service manual for holding and tightening requirements.

Identify a filter conversion before selecting its wrench

The separate tripod filter wrench uses a 3/8-inch drive and is described for aftermarket spin-on filter 15-1006 in this application. Identify the filter arrangement actually installed rather than selecting that wrench for the original-type housing by model year alone.

Engine, Steering & Clutch Tools: buying questions

What should I confirm about the rotor puller’s thread notation?

The listing identifies a right-hand puller for an internally threaded SOHC rotor, but its size is written as “20mm x M1.5”. Confirm the intended diameter and pitch with the seller and compare the fitted rotor before ordering; do not treat that wording as a complete standardized thread designation.

Does a 35mm fork mean I need the 35mm cap wrench?

Not automatically. Fork tube or seal-driver size is separate from the cap’s wrench size. The stock-cap listing specifies 24mm for this application. Measure a changed cap before selecting the separately offered 35mm wrench.

When would the premium clutch tool be more useful than the standard one?

The standard tool lists a 24 mm inside diameter and a 3/8-inch driver. The premium tool has 20 mm and 24 mm ends for a half-inch drive connection. Compare the nuts being serviced and the driver equipment you use before paying for the extra end; the package name alone does not establish a better fit.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1977 Honda CB750K

Votre panier

×