VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1973 Honda CB750K — Outils pour fourche et suspension

This small 1973 Honda CB750K tool selection contains a fork seal driver and a fork cap wrench. They perform different jobs and are sold separately from replacement fork parts. Compare the tool dimensions with the forks and caps fitted to your motorcycle.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Outils pour fourche et suspension

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB650 CB550 CB500 35 36mm fork seal driver

Honda CB750 / CB650 / CB550 / CB500 35/36mm Fork Seal Driver

$49.95 USD
35-4299
Install 35mm or 36mm fork seals cleanly with this 35/36mm Fork Seal Driver. High-quality carbon steel with split design. Use for easy installation of...
Honda CB750 CB550 fork cap wrench 24mm

Honda CB750 / CB550 Fork Cap Wrench ~ 24mm

$7.00 USD
35-9116
Remove 24mm fork caps without damage with this 24mm Non-Marring Fork Cap Wrench. Fits all motorcycles with 24mm fork caps. Lets you remove fork...
Comparer

1973 Honda CB750K · Fork & Suspension Tools Buying guide

Match the tool to the seal or cap being serviced

The seal driver is identified by its supported fork size, while the cap wrench is identified by the cap size. Check the actual fitted parts before ordering, particularly where replacement caps or forks are installed.

Parts to consider

Honda CB750 / CB650 / CB550 / CB500 35/36mm Fork Seal Driver 35/36mm Fork Seal DriverSplit-design seal driver listed for 35mm or 36mm forks; compare its application with your fitted forks.Voir la pièce Honda CB750 / CB550 Fork Cap Wrench ~ 24mm 24mm Fork Cap WrenchCap wrench listed for 24mm fork caps, including the stock-cap CB750K application.Voir la pièce

Choose the driver for the fitted fork assembly

The seal driver description identifies a 35/36mm application and a split design. Compare that specification with the forks being serviced. If a previous owner has changed the forks, establish their dimensions before using the original motorcycle model to choose the tool.

A cap wrench size is a separate measurement

The featured wrench is specified for 24mm fork caps. Compare the actual cap on your motorcycle, particularly if aftermarket caps have been fitted. The size named on the cap wrench does not identify the fork tube diameter or the seal driver size.

Common questions

Does the seal driver include new fork seals?

The featured product is a service tool, described as a split-design fork seal driver. Replacement seals have a separate product listing. Keep the tool and the replacement parts as separate purchases when building your fork service order.

Will the 24mm wrench fit every cap tagged for this bike?

The wrench listing states a 24mm cap application. Custom or replacement caps can have their own specification, so compare the actual fitted cap. The motorcycle model tag alone does not establish that every cap uses the same wrench size.

Are the seal driver size and cap wrench size interchangeable measurements?

The driver listing describes its fork application, while the wrench listing describes the cap size it fits. Use each specification for its stated purpose. Comparing the fitted forks and caps separately avoids choosing a tool by the wrong dimension.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1973 Honda CB750K

Votre panier

×