Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

Consultation en cours Réfection de carburateurs et gicleurs

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

1969-76 Honda CB750F / CB750K Float Bowl Gasket

$5.33 USD
20-8035
Replace your SOHC CB750 float bowl gasket with this Float Bowl Gasket (O-ring). Fits the 1969-76 CB750K and 1975-76 CB750F Supersport.Key Features• Float bowl...

1970-75 Honda CB750K Carb Rebuild Kit

$25.95 USD
48-1908
Rebuild your 1970-75 CB750K carb with this Carb Rebuild Kit, made in Japan. Contains float bowl gasket, O-rings, carb top gasket, float needle and...

Honda CB1000 / CB900 / CB750 Performance Main Jet Kit

$39.95 USD
48-2111
Tune your CB to match your engine mods with this Performance Main Jet Kit. Includes a total of 16 main jets for Keihin carbs....

Honda CB Pilot Jet Set ~ Size #45 (Pk/4)

$15.95 USD
48-3105
Tune your low-speed circuit with this Pilot Jet Set of 4, size #45. Jet height 28mm, outer diameter 5.5mm.Pilot jets control your idle and...

Honda CB Float Valve ~ Replaces 16011-302-004

$9.95 USD
48-5009
Replace your float needle and seat with this Float Valve Set (needle and seat), replacing OEM #16011-302-004 / #16011-375-004.Key Features• Float valve set (needle...

Honda CB1000 / CB900 / CB750 / CB700 Ultimate Performance Main Jet Kit

$64.95 USD
48-2112
Cover every tuning scenario with this Ultimate Performance Main Jet Kit. Includes a total of 44 main jets for Keihin carbs. Use this jet...

Honda CB Pilot Jet Set ~ Size #42 (Pk/4)

$15.95 USD
48-3104
Tune your low-speed circuit with this Pilot Jet Set of 4, size #42. Jet height 28mm, outer diameter 5.5mm.Pilot jets control your idle and...

Honda CB Pilot Jet Set ~ Size #40 (Pk/4)

$15.95 USD
48-3103
Tune your low-speed circuit with this Pilot Jet Set of 4, size #40. Jet height 28mm, outer diameter 5.5mm.Pilot jets control your idle and...

1969-75 Honda CB750K Carburetor Needle Jet Holder ~ Replaces 16139-300-004

$19.95 USD
48-9032
Replace your CB750K needle jet holder with this Carburetor Needle Jet Holder, replacing OEM #16139-300-004.Note: sold each.Key Features• Carburetor needle jet holder• Replaces OEM...

Honda CB Pilot Jet Set ~ Size #38 (Pk/4)

$15.95 USD
48-3102
Tune your low-speed circuit with this Pilot Jet Set of 4, size #38. Jet height 28mm, outer diameter 5.5mm.Pilot jets control your idle and...

Honda CB Pilot Jet Set ~ Size #35 (Pk/4)

$15.95 USD
48-3100
Tune your low-speed circuit with this Pilot Jet Set of 4, size #35. Jet height 28mm, outer diameter 5.5mm.Pilot jets control your idle and...

Honda CB Pilot Jet Set ~ Size #48 (Pk/4)

$15.95 USD
48-3106
Tune your low-speed circuit with this Pilot Jet Set of 4, size #48. Jet height 28mm, outer diameter 5.5mm.Pilot jets control your idle and...

1973 Honda CB750K · Carb Rebuild & Jetting Buying guide

Separate carburetor repairs from jet selection

Decide whether you need a full single-carburetor kit or a narrower seal, float-valve or jet order. The supplied #110 main and #40 pilot are package contents, not proof of the correct setup for altered carburetors.

Buy the rebuild scope you need

The single-carburetor kit covers jets, the needle and seat, gaskets, O-rings and adjusting pieces. A separate float valve or bowl gasket may suit a smaller repair. Compare the work required before duplicating those parts in a full-kit order.

Select jets by specification

The Keihin main-jet assortment contains four each of #105, #110, #115 and #120. The separate #40 pilot-jet pack contains four jets, specified at 28 mm high and 5.5 mm outside diameter. Compare jet type and dimensions as well as the stamped number.

Common questions

Which jets are supplied in the rebuild kit?

A #110 main jet and a #40 pilot jet. Those are the kit’s supplied sizes; identify the installed carburetors and intended intake/exhaust setup before deciding to use them.

How many rebuild kits should I order?

One kit rebuilds one carburetor. Order for the number being serviced and check the contents against any separate gasket, needle-and-seat or jet purchases.

Is the number 40 enough to identify the pilot jet?

Compare the jet’s physical form too. The offered four-pack is #40 with a stated 28 mm height and 5.5 mm outside diameter. A matching number alone does not confirm that an unknown carburetor uses this jet type.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité

Votre panier

×