Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

Consultation en cours Clignotants, supports, cabochons et réflecteurs

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB900 / CB750 / CB650 Turn Signal Relay ~ Replaces 38301-415-671

$11.69 USD
73-1104
Replace your turn signal flasher relay with this Turn Signal (Flasher) Relay, 12V/23W, 3-prong, with rubber mount attached. For the series 2 and later...

Honda CB Stock Type Reflector ~ Replaces 33741-340-670

$21.46 USD
11-2303
Restore your mid-'70s Honda's stock reflectors with this Stock-Type Screw-On Reflector with a 6mm thread, replacing OEM #33741-340-670. Broad fitment covering the 1972-78 CB750...

Honda CB Stock Type Front Reflector Rubber Base ~ Replaces 33743-341-670

$8.95 USD
11-2304
Fit the rubber base beneath your stock front reflector with this Stock-Type Front Reflector Rubber Base, replacing OEM #33743-341-670.Key Features• Stock-type front reflector rubber...

1971-74 Honda CB750K / CB550K / CB500K Rear Turn Signal Stay ~ Replaces 33607-323-670

$19.95 USD
11-2319
Fit the standard-length rear signal stay with this Rear Signal Lamp Stay in chrome, 65mm long, replacing OEM #33607-323-670. Pairs with signal lamp #11-2122....

1971-74 Honda CB750K / CB550K / CB500K Rear Turn Signal Mount & Collar Set ~ Replaces 33605-323-670

$42.95 USD
73-0127
Mount your rear signals with this Rear Turn Signal Mount, Collar and Rubber Set. Includes both left and right sides. Needed when installing the...

Honda CB Front Turn Signal Stay

$12.95 USD
11-2167
Replace a damaged front signal stay with this Front Signal Lamp Stay in chrome. Body length 65mm, thread 25mm, total length 90mm. Pairs with...

1972-74 Honda CB750K Rear Turn Signal Stay Screw Set/2

$8.95 USD
49-0001
Replace your rear turn signal stay screws with this Rear Signal Lamp Stay Screw Set of 2. Includes the screws that fasten the rear...

1969-74 Honda CB750K / CB550K / CB500K Turn Signal Pinch Bolt Set

$7.00 USD
73-0840
Replace your turn signal mounting hardware with this Turn Signal Pinch Bolt Set. Includes 2x chrome bolts, 2x hex nuts, and 4x flat washers,...

Honda CB750 / CB550 / CB500 / CB350 Front Turn Signal Stay

$13.95 USD
73-1106
Mount a front turn signal with this Front Signal Lamp Stay, Chrome.Body length 40mm, thread 30mm, total length 70mm.Note: we sell these in various...

Honda CB750 / CB550 / CB500 / CB350 Front Turn Signal Stay ~ Short Type

$13.95 USD
73-1105
Mount a front turn signal with this Front Signal Lamp Stay with nut and washer, Short Type, Chrome.Body length 26mm, thread 21mm, total length...

Honda CB Turn Signal Lamp Gasket ~ Replaces 33443-268-671

$4.61 USD
11-2085
Service your early CB750 or classic twin turn signal with this Turn Signal Lamp Gasket, replacing OEM #33443-268-671. Pairs with our signal lens #11-2110...
Épuisé
Honda CB750K front turn signal stay nut and washer set

1969-72 Honda CB750K Front Turn Signal Stay Nut & Washer Set

$9.95 USD
49-0002
Replace your front turn signal stay nuts and washers with this Front Signal Lamp Stay Nut & Washer Set. These are the nuts and...

Honda CB Rear Turn Signal Stay ~ Replaces 33441-369-000

$18.95 USD
11-2318
Fit an extended-length rear signal stay with this Rear Signal Lamp Stay in chrome, 125mm long, replacing OEM #33441-369-000. This is longer than the...

1972 Honda CB750K · Turn Signal Lamps, Stems, Lenses & Reflectors Buying guide

Compare the signal mount and reflector parts separately

The rear collar set, stock-type reflector and signal gasket serve different repairs. Match each piece with the existing assembly; choosing supporting hardware does not establish whether a replacement one-wire or two-wire lamp suits your wiring.

Keep the reflector and its rubber base separate

Compare the reflector attachment and rubber base with the fitted mount. The screw-on reflector and front rubber base are separate products; the full mount needs its own identification on a changed front end.

Match the mount without assuming lamp interchange

Identify the rear mounting pieces needing replacement before choosing the left-and-right collar set. If the lamp also needs replacement, check its own electrical requirements and connections independently of the mounting hardware.

Common questions

Does the rear mount set include both sides?

The rear turn-signal mount and collar description specifies left and right sides with rubber. It is supporting mounting hardware, so check the lamp and other service parts separately rather than treating the set as complete signals.

Is the front reflector rubber base included with the reflector?

The reflector and front rubber base have separate listings. The reflector description identifies a screw-on part with a 6 mm thread; compare the installed base and mount before deciding which pieces your repair requires.

Does the reflector’s 6 mm thread specify the pitch?

The reflector gives a 6 mm thread size without a pitch. For a changed mount, confirm the full thread requirement before ordering. The separate rubber base references 33743-341-670 and does not resolve a different mount’s thread.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité

Votre panier

×