VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1972 Honda CB750K — Supports, caoutchoucs et fixations

Repair the small pieces around your 1972 Honda CB750K instruments: meter rubbers, internal seals, speedometer and tachometer clamps, glass, covers and a tripmeter knob. Compare the damaged part first, then check whether the chosen clamp or cover includes the hardware you need.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Supports, caoutchoucs et fixations

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750K speedo tachometer meter rubber 37235-300-029

1969-72 Honda CB750K Speedo/Tachometer Meter Rubber ~ Replaces 37235-300-029

$29.95 USD
73-0097
Replace your speedo / tach meter rubber with this Speedometer / Tachometer Meter Rubber, replacing OEM #37235-300-029.Note: one used with the speedo and one...
Honda CB750 CB550 CB500 speedometer tachometer internal rubber seal

Honda CB750 / CB550 / CB500 Speedometer / Tachometer Internal Rubber Seal

$11.95 USD
49-0255
Replace your gauge internal seal with this Speedometer / Tachometer Internal Rubber Seal. Replaces the ripped, dried, or missing rubber internal seal.Key Features• Speedo...
Honda CB750K stock type speedo tach clamp hardware set

1969-72 Honda CB750K Stock Type Speedo/Tach Clamp Hardware Set

$4.61 USD
17-6946
Refresh the hardware on your early CB750K speedo and tach clamps with this 8-piece Speedo / Tach Clamp Hardware Set. Includes hardware for both...
Honda CB750K speedometer clamp 53231-300-000

1969-72 Honda CB750K Speedometer Clamp ~ Replaces 53231-300-000

$21.95 USD
73-1052
Replace your speedometer clamp with this Stock Style Chrome Speedometer Clamp, replacing OEM #53231-300-000.Hardware not included, sold separately below as #17-6946.Key Features• Stock-style chrome...
Honda CB chrome speedometer and tachometer cover set

Honda CB Chrome Speedometer & Tachometer Cover Set

$44.95 USD
02-2480
Dress up your gauge cluster with this Chrome Speedometer & Tachometer Cover Set. These chrome-plated covers fit over your stock speedo and tach to...
Honda CB750K tachometer clamp 53232-300-000

1969-72 Honda CB750K Tachometer Clamp ~ Replaces 53232-300-000

$21.95 USD
73-1051
Replace your tachometer clamp with this Stock Style Chrome Tachometer Clamp, replacing OEM #53232-300-000.Hardware not included, sold separately below as #17-6946.Key Features• Stock-style chrome...
Épuisé
Honda CB750F CB750K speedometer and tachometer crimp ring set 2

1971-78 Honda CB750F / CB750K Speedometer & Tachometer Crimp Ring Set/2

$59.95 USD
49-0249
Restore your gauge faces with this Speedometer & Tachometer Crimp Ring Set of 2. When changing the speedometer or tachometer faceplates, these rings are...
Honda CB750 CB550 CB500 speedometer and tachometer replacement glass lens set 2

Honda CB750 / CB550 / CB500 Speedometer & Tachometer Replacement Glass Lens Set/2

$44.95 USD
49-0250
Replace scratched or broken gauge glass with this Speedometer & Tachometer 92mm Glass Lens Set of 2. If the glass lens of your gauges...
Honda CB750F CB750K CB550K two metal speedo tach gauge covers with crimp rings

1971-78 Honda CB750F / CB750K / CB550K Two Metal Speedo / Tach Gauge Covers With Crimp Rings

$199.95 USD
49-0252
Recondition your gauges with this Two Metal Speedo / Tach Gauge Covers with Crimp Rings set. Metal gauge covers are often dented, scratched, and...
Honda CB750K speedometer tripmeter reset knob 37237-300-000

1969-72 Honda CB750K Speedometer Tripmeter Reset Knob ~ Replaces 37237-300-000

$26.95 USD
49-0253
Replace your speedometer tripmeter knob with this Speedometer Tripmeter Reset Knob, replacing OEM #37237-300-000. These buttons are often damaged and are no longer available...
Comparer

1972 Honda CB750K · Mounts, Rubbers & Hardware Buying guide

Identify the missing piece around each gauge

This category combines gauge mounting parts with restoration pieces for the instrument housing. A clamp, meter rubber, internal seal and lens are different purchases, even when their listings refer to the same gauges.

Parts to consider

1969-72 Honda CB750K Speedo/Tachometer Meter Rubber ~ Replaces 37235-300-029 Speedo / tach meter rubberReplacement for the meter rubber referencing 37235-300-029. The listing specifies one for the speedometer and one for the tachometer.Voir la pièce 1969-72 Honda CB750K Speedometer Clamp ~ Replaces 53231-300-000 Chrome speedometer clampStock-style speedometer clamp referencing 53231-300-000. Fastening hardware is sold separately.Voir la pièce 1969-72 Honda CB750K Tachometer Clamp ~ Replaces 53232-300-000 Chrome tachometer clampStock-style tachometer clamp referencing 53232-300-000. Fastening hardware is sold separately.Voir la pièce

Pièces connexes : Speedo and tach clamp hardware set · Replacement gauge glass lens set · Internal gauge rubber seal

Keep mounting and internal restoration pieces separate

The internal seal is specified for stock-type Honda CB750 ND-brand gauges. The external meter rubber is a different part, with one specified per speedometer or tachometer. Identify the gauge maker and the rubber’s location before choosing.

Review the small exclusions before a gauge rebuild

The linked replacement glass is a pair of 92 mm lenses, described with a slight curve. Check whether the restoration needs glass, an internal seal or the external meter rubber before combining those separate products.

Common questions

Does a replacement clamp come with bolts and washers?

The clamps exclude hardware. The separate eight-piece hardware set is described for both the speedometer and tachometer clamps, so check that package before ordering two sets.

Will the internal seal fit a custom replacement gauge?

Its application is stock-type Honda CB750 ND-brand gauges. Identify the gauge maker and construction before choosing it for a custom instrument; the motorcycle’s year does not establish the seal inside a replacement gauge.

Will every gauge cover clear the tripmeter reset?

Check the specific cover. The decorative chrome cover set describes a reset cutout, while the black metal cover set says it lacks the side hole and must be drilled if required. Match that detail to your speedometer before ordering.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1972 Honda CB750K

Votre panier

×