VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1971 Honda CB750K — Clignotants, supports, cabochons et réflecteurs

Compare the signal housing, wiring and stem fitted to your 1971 CB750K before selecting replacements. Complete lamps, individual lenses and mounting hardware are different purchases. Several stem lengths appear in this category, so the part currently on your motorcycle is an important reference.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Clignotants, supports, cabochons et réflecteurs

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB900 CB750 CB650 turn signal relay 38301-415-671

Honda CB900 / CB750 / CB650 Turn Signal Relay ~ Replaces 38301-415-671

$11.69 USD
73-1104
Replace your turn signal flasher relay with this Turn Signal (Flasher) Relay, 12V/23W, 3-prong, with rubber mount attached. For the series 2 and later...
Honda CB750 CB550 CB500 CB400 CB360 front turn signal stay

Honda CB Front Turn Signal Stay

$12.95 USD
11-2167
Replace a damaged front signal stay with this Front Signal Lamp Stay in chrome. Body length 65mm, thread 25mm, total length 90mm. Pairs with...
Honda CB750K CB550K CB500K turn signal pinch bolt set

1969-74 Honda CB750K / CB550K / CB500K Turn Signal Pinch Bolt Set

$7.00 USD
73-0840
Replace your turn signal mounting hardware with this Turn Signal Pinch Bolt Set. Includes 2x chrome bolts, 2x hex nuts, and 4x flat washers,...
Honda CB750 CB550 CB500 CB350 front turn signal stay

Honda CB750 / CB550 / CB500 / CB350 Front Turn Signal Stay

$13.95 USD
73-1106
Mount a front turn signal with this Front Signal Lamp Stay, Chrome.Body length 40mm, thread 30mm, total length 70mm.Note: we sell these in various...
Honda CB750 CB550 CB500 CB350 front turn signal stay short type

Honda CB750 / CB550 / CB500 / CB350 Front Turn Signal Stay ~ Short Type

$13.95 USD
73-1105
Mount a front turn signal with this Front Signal Lamp Stay with nut and washer, Short Type, Chrome.Body length 26mm, thread 21mm, total length...
Honda CB750 CB500 CB450 CB400 turn signal lamp gasket 33443-268-671

Honda CB Turn Signal Lamp Gasket ~ Replaces 33443-268-671

$4.61 USD
11-2085
Service your early CB750 or classic twin turn signal with this Turn Signal Lamp Gasket, replacing OEM #33443-268-671. Pairs with our signal lens #11-2110...
Honda CB750K rear turn signal ground cables set 2 33620-300-000

1969-71 Honda CB750K Rear Turn Signal Ground Cables Set/2 ~ Replaces 33620-300-000

$7.95 USD
73-1117
Restore proper rear turn signal function with this pair of high-quality ground cables, designed to match OEM# 33620-300-000. These cables ensure a solid electrical...
Épuisé
Honda CB750K front turn signal stay nut and washer set

1969-72 Honda CB750K Front Turn Signal Stay Nut & Washer Set

$9.95 USD
49-0002
Replace your front turn signal stay nuts and washers with this Front Signal Lamp Stay Nut & Washer Set. These are the nuts and...
Nouveau
Honda CB750 CB450 CL450K1 CL450K2 rear turn signal stay 33607-292-000

Honda CB Rear Turn Signal Stay ~ Genuine Honda 33607-292-000 ~ Replaces 33607-292-000

$59.95 USD
99-5164
This genuine Honda rear turn signal stay mounts the rear turn signal to the motorcycle frame and helps keep the signal straight, secure, and...
Comparer

1971 Honda CB750K · Turn signals Buying guide

Match the wiring and stem before choosing a lamp

A signal repair can involve the lamp, its lens seal or the mounting stay. Choose the affected pieces separately, checking wire count and measurements instead of assuming similar chrome parts share the same specification.

Parts to consider

Honda CB Front Turn Signal Stay 90mm chrome front signal stayThis stay lists a 65mm body and 25mm threaded section, giving a 90mm overall length.Voir la pièce Honda CB Turn Signal Lamp Gasket ~ Replaces 33443-268-671 Amber-lamp lens gasketGasket described for the linked amber lens and the two-wire signal lamp shown in this guide.Voir la pièce

Pièces connexes : Mounting hardware for two signals · Rear signal ground cable pair

Use measurements rather than the photograph alone

The front stays include short, medium and longer choices with separate body and thread measurements. A similar finish does not make them identical. Compare all listed dimensions with the existing stay and desired mounting arrangement before choosing which version to order.

Check the smaller items in the repair

The linked pinch-bolt pack provides hardware for two signals, and the rear ground cable listing is a pair. Lens gaskets are separate from the amber lens listing. Read the supplied quantities so a repair to several lamps does not leave a missing mounting or sealing piece.

Questions about turn signals

Are the one-wire and two-wire lamps the same choice?

They are listed as distinct versions, and both descriptions ask buyers to verify the required wire type. Compare the lamp and wiring on your motorcycle first. Do not select a version only because its housing looks similar.

How many signals does the pinch-bolt pack cover?

The linked pack supplies two chrome bolts, two nuts and four washers for two signals. Its description says two packs are required for all four signals. Order against the number of mounting positions you are actually servicing.

Does the 90mm stay have a 90mm body?

No. Its stated body length is 65mm, with a 25mm threaded section and 90mm total length. Other stays have different measurements. Compare the body and thread separately when matching a replacement to the existing lamp mount.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1971 Honda CB750K

Votre panier

×