VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1971 Honda CB750K — Outils pour fourche et suspension

These fork service tools for the 1971 Honda CB750K address different tasks: removing a stock-size cap and installing a seal. The cap wrench dimension and seal driver application are not interchangeable measurements. Compare the tool description with the fork hardware actually fitted before ordering.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Outils pour fourche et suspension

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB650 CB550 CB500 35 36mm fork seal driver

Honda CB750 / CB650 / CB550 / CB500 35/36mm Fork Seal Driver

$49.95 USD
35-4299
Install 35mm or 36mm fork seals cleanly with this 35/36mm Fork Seal Driver. High-quality carbon steel with split design. Use for easy installation of...
Honda CB750 CB550 fork cap wrench 24mm

Honda CB750 / CB550 Fork Cap Wrench ~ 24mm

$7.00 USD
35-9116
Remove 24mm fork caps without damage with this 24mm Non-Marring Fork Cap Wrench. Fits all motorcycles with 24mm fork caps. Lets you remove fork...
Comparer

1971 Honda CB750K · Fork & Suspension Tools Buying guide

Choose by the task, not by the shared fork label

A 24mm wrench fits the stated stock cap application, while the split 35/36mm driver is designed for fork seal installation. Identify which operation you need to carry out and compare the matching tool dimensions with the fitted parts.

Parts to consider

Honda CB750 / CB550 Fork Cap Wrench ~ 24mm 24mm stock-cap wrenchNon-marring cap wrench listed for stock 24mm Honda CB750K fork caps.Voir la pièce Honda CB750 / CB650 / CB550 / CB500 35/36mm Fork Seal Driver Split 35/36mm fork seal driverCarbon-steel split driver described for installing seals on 35mm or 36mm fork applications.Voir la pièce

Keep the two size descriptions separate

The wrench’s 24mm size describes the cap it is designed to engage. The seal driver’s 35/36mm designation describes its fork application for seal installation. Neither dimension can be substituted for the other when choosing a tool, even though both products are used during fork service.

Check the cap that is actually on the bike

A custom cap can change the tool needed even when the fork tubes remain the same diameter. Inspect the cap and compare its dimensions before choosing the stock-cap wrench. Use suitable service information for the work rather than treating the tool listing as an installation procedure.

Questions before you order

Should I buy a 35mm wrench because the tube is 35mm?

Tube outside diameter does not establish cap wrench size. The selected wrench is explicitly listed for stock 24mm caps; identify the cap actually fitted and choose the tool from that measurement.

What is the split seal driver used for?

Its listing describes fork seal installation on 35mm or 36mm applications. It is a seal installation tool, not a wrench for removing the fork cap; compare its application with the fork being serviced.

Do these listings supply replacement fork parts?

They are tool listings. Fork seals, caps, tubes and other replacement parts are separate products, so add any needed service components separately after identifying the fitted fork and the work required.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1971 Honda CB750K

Votre panier

×