Pièces pour motos Honda
Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.
Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.
1976 Honda CB750F · Rims, spokes & wheel bearings Buying guide
The spoke sets specify stock wheel sizes, while bearings, seals and retainers have separate references and locations. Identify any replacement wheel or hub before ordering parts by model year alone.
Rear spoke setForty spokes and nipples for the stock 18 inch rear on the 1975-76 F.Voir la pièce
Front spoke setForty cadmium-plated spokes for the 19 inch front on the 1975-76 F.Voir la pièce
Brake side rear retainerLocking ring for the disc side, replacing OEM 41231-286-000.Voir la pièce
Pièces connexes : Rear bearing removal tool · Sprocket side retainer · Front wheel seal
The listed 6304-2RS bearing measures 20 mm ID × 52 mm OD × 15 mm wide. The separate 6305-2RS listing cross-references Honda 96140-63050-10. Match the bearing designation and dimensions, then confirm the required position and quantity from parts information for the fitted wheel.
Both spoke sets list stock wheel applications for the 1975–76 CB750F. The front set supplies 40 cadmium-plated steel spokes and matching silver nipples for the 19-inch wheel. The rear set supplies 40 silver spokes and 40 gold nipples for the 18-inch wheel. Rim diameter alone does not confirm a match where hubs or rims have been changed.
The retainer replacing Honda 41231-286-000 is listed for the brake-disc side. The one replacing 41231-283-000 is listed for the sprocket side. Match the existing reference and hub position rather than assuming the shared rear-retainer description establishes interchangeability.
The linked removal tool for retainers 41231-286-000 and 41231-429-000 accepts a 22 mm hex or a 3/8-inch square drive. The separately listed sprocket-carrier retainer-ring tool accepts a 1/2-inch square drive and lists the 1975–78 CB750F carrier application. Confirm the tool’s working end matches the actual retainer as well as the drive equipment you have.
Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.
Sélectionnez le modèle exact et l’année pour affiner les résultats.
Choisissez votre modèle et l’année.