VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1978 Honda CB750A — Tubes, ressorts, joints et soufflets de fourche

Fork repairs on a 1978 CB750A may need tubes, springs, seals or the smaller pieces surrounding them. These are separate listings. The spring set specifically excludes spacer and washer use on the Hondamatic, and both tube listings ask buyers to confirm the required length.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Tubes, ressorts, joints et soufflets de fourche

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB650 CB550 CB500 fork seals

Honda CB750 / CB650 / CB550 / CB500 Fork Seals

$19.95 USD
27-1007
Replace your fork seals with this Fork Seal Set, 35 x 48 x 10.5 / 11mm. High quality, made in Japan. Key Features• Fork...
Honda CB750 CB650 CB550 CB500 fork seal stopper metal rings (pk 2) 51447-KL4-951

Honda CB750 / CB650 / CB550 / CB500 Fork Seal Stopper Metal Rings (Pk/2) ~ Replaces 51447-KL4-951

$7.95 USD
73-0940
Replace your fork seal stopper metal rings with this Fork Seal Stopper Metal Ring Pk/2, replacing OEM #51447-KL4-951. This is the metal ring above...
Honda CB750 CB550 CB500 CB450 CB400 reflector 33741-340-670

Honda CB Stock Type Reflector ~ Replaces 33741-340-670

$21.46 USD
11-2303
Restore your mid-'70s Honda's stock reflectors with this Stock-Type Screw-On Reflector with a 6mm thread, replacing OEM #33741-340-670. Broad fitment covering the 1972-78 CB750...
Honda CB750A CB750F CB750K fork tube set

1972-78 Honda CB750A / CB750F / CB750K Fork Tube Set

$179.95 USD
73-1148
Replace your fork tubes with this Fork Tube Set of 2 for the late-1970s CB750 models.Before ordering please confirm this is the length you...
Honda CB750 CB550 fork dust boot set

1975-78 Honda CB750 / CB550 Fork Dust Boot Set

$24.95 USD
27-1080
Replace your 35mm fork dust boots with this Fork Seal Dust Boot Set of 2 for 35mm fork tubes.Key Features• Fork dust boot set,...
Honda CB750 CB550 CB500 CB450 35mm front fork tube bolt with o-ring 90123-300-000

Honda CB750 / CB550 / CB500 / CB450 35mm Front Fork Tube Bolt with O-Ring ~ Replaces Honda OEM 90123-300-000

$17.95 USD
29-6013
This aftermarket 35mm front fork tube bolt is used as the top cap/bolt on compatible Honda CB 35mm fork tubes. It replaces Honda OEM...
Honda CB750A CB550F CB550K Progressive type front fork springs

1974-78 Honda CB750A / CB550F / CB550K Progressive Type Front Fork Springs

$84.95 USD
33-0005
Upgrade your fork performance with this Progressive Type Front Fork Spring Set of 2, including 10" pipe and washers. Progressive springs improve handling and...
Honda CB750 CB650 CB550 front fork damper valve set

Honda CB750 / CB650 / CB550 Front Fork Damper Valve Set

$79.95 USD
27-1886
Upgrade your 35mm rod-style front forks to perform like modern cartridge forks with this Front Fork Damper Valve Set of 2. These tunable valves...
Universal motorcycle fork cap wrench 35mm

Universal Motorcycle Fork Cap Wrench ~ 35mm

$7.00 USD
35-9113
Fork Cap Wrench ~ 35MM Size for custom or restoration work on classic Honda CB motorcycles.  Key Features Aftermarket part Sold as: Each Fitment...
Voir les détails
Honda CB750A CB750F CB750K fork tube set

1972-78 Honda CB750A / CB750F / CB750K Fork Tube Set

$179.95 USD
73-1080
Replace your fork tubes with this Fork Tube Set of 2, length 605mm (23 13/16") with 35mm OD.Note: this length is 23 13/16", one...
Honda CB900 CB750 CB650 CB550 front fork oil lock piece 51432-371-003

Honda CB900 / CB750 / CB650 / CB550 Front Fork Oil Lock Piece ~ Genuine Honda 51432-371-003

$29.95 USD
99-5318
This genuine Honda front fork oil lock piece fits inside the front fork assembly on the Honda CB models listed below. It works with...
Comparer

1978 Honda CB750A · Fork Tubes, Springs, Seals & Boots Buying guide

Check the Hondamatic spring note and tube length separately

The selected tube package supplies two tubes, the progressive spring package has an application-specific note, and the seal listing provides its dimensions. Dust boots, stopper rings and internal oil-lock pieces remain distinct service parts.

Parts to consider

1972-78 Honda CB750A / CB750F / CB750K Fork Tube Set Fork tube pair for the HondamaticSet of two tubes with the CB750A listed in the description. Confirm the required length before ordering; this listing does not state a numeric length.Voir la pièce 1974-78 Honda CB750A / CB550F / CB550K Progressive Type Front Fork Springs Progressive spring pair for the CB750ATwo fork springs supplied with pipe and washers. The description specifically says spacers and washers are not used on the CB750A Hondamatic.Voir la pièce Honda CB750 / CB650 / CB550 / CB500 Fork Seals Fork seal setSeal set listed at 35 × 48 × 10.5 / 11 mm, with the 1978 CB750A included. Compare the existing seal dimensions and arrangement.Voir la pièce

Pièces connexes : Two-piece fork dust boot set · Fork seal stopper rings, pack of two · Genuine Honda internal fork oil-lock piece

Keep application-specific instructions with the parts

Read the spring package’s Hondamatic exception before planning the work. Match the exact spring product and motorcycle application rather than applying a general spacer instruction to every bike listed.

Keep tube measurements separate from model comparisons

Measure the required tube length and compare the chosen listing. The featured set omits a numeric length; the alternative set provides 605mm and asks buyers to confirm that length. Retain the installed fork’s details before discarding the old tubes.

Common questions

Are pipe and washers supplied with the springs used on the Hondamatic?

The package includes pipe and washers, but the description expressly says spacers and washers are not used on the CB750A Hondamatic. Keep that application note in view when reading the product instructions and planning the work.

Does the other 605 mm tube listing establish an original CB750A length?

It lists 605 mm tubes and includes the CB750A with a requirement to confirm length. Its longer-than-stock note is assigned to earlier K applications. Compare the installed fork rather than transferring that comparison to the Hondamatic.

Does the genuine Honda oil-lock piece arrive as a pair?

The oil-lock-piece listing specifies Honda 51432-371-003 and says sold individually. A tube set supplies two tubes, but that count does not determine the order quantity for internal oil-lock pieces. Have the fork assessed and order the number actually required.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1978 Honda CB750A

Votre panier

×