Honda motorcycle parts
Choose your model and year to see parts listed for your bike.
Choose your model and year to see parts listed for your bike.
1986 Honda CB450SC Nighthawk · Electrical Buying guide
The genuine oil switch, six-wire charging unit and individual XD05F cap cover different electrical service needs. Each has its own identification or supply details. Compare those details with the installed component before deciding what belongs in the repair order.
Genuine oil-warning switchThe listed 1986 CB450SC application uses this warning-switch replacement. One genuine Honda switch is supplied; compare the original reference, terminal and sealing arrangement.View part
Six-wire regulator identificationThe wiring description names three yellow wires in one connector and three wires in a four-space block. Match both blocks and one of the listed Honda references.View part
XD05F cap for lead renewalOne resistor-style cap is included for a matching plug-lead position. The 1986 CB450SC is expressly listed, while the high-tension wire needs separate assessment and purchase if worn.View part
Related parts: Replacement turn-signal relay · Clutch starter-interlock switch · Individual battery support rubber
The XD05F cap supplies no high-tension wire, so examine the lead and its connection before retaining them. Similar checks apply elsewhere: compare regulator connections and inspect the oil switch’s terminal and sealing arrangement. An original reference identifies the replacement without establishing the condition of the adjoining parts.
The clutch switch’s title includes brake-light wording, while the detailed listing identifies a starter-safety switch at the clutch perch. Use that stated function and Honda reference 35330-413-003 when planning the purchase. It should not replace the mechanically operated rear stop-light switch simply because the title mentions a brake light.
Allow for the high-tension wire separately: one XD05F cap is supplied without that lead. Inspect the retained wire for cracks, hardening or corrosion, then decide whether additional wire renewal belongs in the repair alongside the matching replacement cap.
Use its detailed starter-safety application and Honda 35330-413-003 reference to identify the item. It permits starting with the clutch lever pulled. Confirm the compatible perch and connection rather than choosing it to replace the rear pedal’s stop-light switch.
Verify oil level, switch wiring and actual oil pressure using the Honda procedure before choosing the replacement. Then match the original reference, terminal and sealing arrangement. The listing warns that a new switch will not correct an engine unable to build pressure.
Send your model and year, plus photos of your existing part and any changes to the original setup.
Select your exact model and year to narrow your results.
Choose your model and year.