My motorcycle Choose your Honda CB model

Search parts

Searching all Honda CB parts

Example: brake pads or oil filter.

Currently viewing Ignition Systems, Ignition Switch, Coils, Plugs, Contact Points

Honda motorcycle parts

Choose your model and year to see parts listed for your bike.

Honda CB Ignition Coil ~ Replaces 30500-292-672

$37.95 USD
17-6923
Replace your CB450/CL450, CB500T, or CB350/CL350/SL350 ignition coil with this Ignition Coil, replacing OEM #30500-292-672 / #30500-312-000 / #30500-286-004 / #30500-286-007 / #30500-310-670. 12V...

Honda CB Condenser ~ Replaces 30250-369-004

$21.95 USD
26-5106
Replace your condenser with this Condenser, replacing OEM #30250-369-004 / #30280-292-672 / #30280-292-671.Key Features• Condenser• Replaces OEM #30250-369-004 / #30280-292-672 / #30280-292-671• Honda part...
New
Honda CB500 CB450 CL450K0 contact point right side 30203-292-003

Honda CB Contact Point ~ Right Side ~ Replaces 30203-292-003

$14.95 USD
14-0007
Replace the right-side contact point on your CB500T or CB450/CL450 with this Contact Point for the Right Side, replacing OEM #30203-292-003 / #30203-292-154.Key Features•...
New
Honda CB500 CB450 CB160 CL450K0 contact point left side 30204-292-003

Honda CB Contact Point ~ Left Side ~ Replaces 30204-292-003

$14.95 USD
14-0008
Match with the left-side contact point using this Contact Point for the Left Side, replacing OEM #30204-292-003 / #30204-292-154. Same fitment as 14-0007 plus...

Universal Motorcycle Spark Plug Cap ~ VB05F

$9.50 USD
23-3124
Universal Motorcycle Spark Plug Cap ~ VB05F is an aftermarket part for the Honda CB applications listed in this product information. Before ordering, confirm...

Honda CB500/CB450 Spark Plug Cap ~ YB05F

$10.95 USD
23-3120
Spark Plug Cap - YB05F for custom or restoration work on classic Honda CB motorcycles.  Key Features Aftermarket part Sold as: Each Fitment /...

1973 Honda CB450K · Ignition Systems, Coils & Plugs Buying guide

Read the coil rating separately from the cap requirements

The coil is sold each with wires attached, rated 12V, single output and 5-ohm primary. VB05F and YB05F caps are aftermarket choices sold individually without a stated resistance. Left and right contact points and the condenser have their own replacement references.

Check wire reach after choosing the mounting orientation

The approximately 80mm bracket spacing is only part of the coil comparison. Its leads are already attached, and the beige-coil note changes the mounting direction. Assess all three wire lengths and bullet ends against the retained routing before accepting a fit at the bracket alone.

Keep separate ignition references with the parts being replaced

Left points use 30204-292-003 / 30204-292-154; right points use 30203-292-003 / 30203-292-154. The condenser lists 30250-369-004 / 30280-292-672 / 30280-292-671. Compare the removed components and confirm supplied quantities before planning a combined ignition-service order.

Coil layout and cap specification questions

What if the mounting holes match but a coil lead cannot reach?

Compare the stated lead lengths, exits and connector ends with the actual wire paths. Matching approximately 80mm centres does not establish adequate lead reach. Confirm the required arrangement before choosing the attached-wire coil for a modified bracket or harness.

Where can I find the cap resistance needed by a changed ignition?

Establish the requirement for the ignition, plug and lead now being used, then confirm the chosen cap meets it. Neither cap description states a resistance value. The coil’s 5-ohm primary rating describes a different component and cannot supply that missing cap specification.

How do I avoid mixing the two contact-point replacements?

Record the side and reference of the point removed. The left product uses 30204-292 references and the right uses 30203-292 references. Their common CB450K application does not resolve the side or expressly establish a combined pair in one purchase.

Not sure which part you need?

Send your model and year, plus photos of your existing part and any changes to the original setup.

Ask a fitment question

Your cart

×