Honda motorcycle parts
Choose your model and year to see parts listed for your bike.
Choose your model and year to see parts listed for your bike.
1971 Honda CB450K · Swing Arm Parts Buying guide
The thrust bushings replace 52109-283-300, while felts and caps have their own references and two-piece sets. The shock mounting bushing is individually supplied with stated dimensions. The pivot locknut and washer do not establish a complete bolt-and-sleeve package.
Left and right pivot feltsTwo felts replacing 52145-283-000. The description identifies left and right pieces; metal caps and bushings are separate products.View part
Two bronze thrust bushingsThrust set referencing 52109-283-300. Compare the pivot component required instead of assuming the other bronze swingarm bushing set replaces the same part.View part
Two metal pivot end capsDust caps referencing 52144-283-010 for the swingarm pivot ends. Match the original caps and check felt replacement needs separately.View part
Related parts: Individual rear shock mounting bushing · Pivot locknut and washer
The mounting bushing between shock and swingarm is individually sold, referencing 40548-268-000. Its description specifies 19mm length, 22mm OD and 10mm ID. Compare that component directly; those dimensions do not identify the separate pivot bushings or establish the contents of any bronze bushing set.
The pivot fastening product references locknut 90354-268-000 and washer 90526-268-000, without a replacement pivot bolt or sleeve stated. Check the retained components and the separate sealing pieces before ordering. A two-piece felt, cap or bushing set does not define a complete swingarm pivot repair kit.
The metal cap set supplies two referencing 52144-283-010. Pivot felts are a separate two-piece product referencing 52145-283-000. Inspect both types of component and identify which need replacement rather than assuming a cap package includes the felts.
The thrust set provides reference 52109-283-300; the separate bronze swingarm bushing set does not state dimensions. Identify the pivot component and confirm its measurements for an altered swingarm before ordering. Shared material and set quantity do not verify a modified arrangement.
The shock bushing uses 40548-268-000 with 19mm length, 22mm OD and 10mm ID, and individual supply. It serves the shock-to-swingarm connection. Compare that location separately; the thrust reference 52109-283-300 identifies another bushing component.
Send your model and year, plus photos of your existing part and any changes to the original setup.
Select your exact model and year to narrow your results.
Choose your model and year.