Honda motorcycle parts
Choose your model and year to see parts listed for your bike.
Choose your model and year to see parts listed for your bike.
1969 Honda CB450K · Swing Arm Parts Buying guide
The thrust bushings replace 52109-283-300. Felts and metal dust caps use different references and are each sets of two. Check the pivot hardware separately; the locknut-and-washer listing does not state a replacement pivot bolt or sleeve supplied.
Bronze thrust bushings, two-piece setTwo thrust bushings replacing 52109-283-300. Match the pivot component being replaced; the separate bronze swingarm bushing listing is another product.View part
Left and right swingarm pivot feltsSet of two pivot felts referencing 52145-283-000. Metal dust caps are a separate purchase; compare both types of sealing component during the repair.View part
Metal pivot dust caps, set of twoTwo metal caps for the swingarm pivot ends, replacing 52144-283-010. Inspect the existing caps and check the pivot felts and bushings separately.View part
Related parts: Pivot locknut and washer · Shock-to-swingarm mounting bushing
The shock mounting bushing references 40548-268-000 and is listed at 19mm length, 22mm OD and 10mm ID. It is sold individually and fits between the shock and swingarm. Those details describe a different component from the pivot thrust bushings and other bronze pivot bushing set.
The metal caps, felts and bushing sets have separately stated contents. The pivot fastening product supplies a locknut and washer, referencing 90354-268-000 and 90526-268-000. Inspect the remaining bolt and sleeve and identify any additional components instead of assuming one package renews the whole pivot assembly.
The thrust set identifies reference 52109-283-300; the other bronze swingarm bushing set is a separate product without dimensions stated. Compare the specific pivot component and confirm its measurements. Shared material and two-piece quantities do not establish interchangeability.
The listing states 19mm length, 22mm outside diameter and 10mm inside diameter, with reference 40548-268-000 and individual supply. Compare the shock-to-swingarm mounting component removed; these measurements are not specifications for the separate pivot bushings.
The metal dust cap set confirms two caps referencing 52144-283-010. The left and right felts are listed separately as two pieces with reference 52145-283-000. Check the existing components to decide whether the repair needs one set or both.
Send your model and year, plus photos of your existing part and any changes to the original setup.
Select your exact model and year to narrow your results.
Choose your model and year.