Honda motorcycle parts
Choose your model and year to see parts listed for your bike.
Choose your model and year to see parts listed for your bike.
1977 Honda CB550F · Brake & clutch Buying guide
Start with the worn assembly, then compare its supporting parts. A front brake rebuild can involve the caliper and master cylinder; clutch service separates the cable controls from the engine’s friction and steel plates.
Front disc pad setTwo Kevlar pads, sized 52 × 20 mm and 52 × 12.8 mm, for the listed front brake.View part
Rear drum shoe setTwo shoes for the rear drum brake; replacement reference 43120-283-670.View part
Clutch control cableMade-in-Japan replacement for reference 22870-374-000; compare the cable ends and installed route.View part
Related parts: 1977 front master cylinder rebuild kit · Replacement front caliper assembly · Individual clutch friction plate #1
The linked master cylinder kit references 45530-404-315 and includes the 1977 CB550F application. The linked caliper assembly supplies its listed major components and may need final assembly. Identify the fitted hydraulics before ordering; master cylinder parts and supporting hoses have their own applications and service requirements.
A damaged cable or worn lever pivot calls for control parts, while internal clutch service calls for the correct plate types and quantities. The CB550F friction arrangement uses six #1 plates and one different #2 plate. Steel selection also requires the engine application, so compare the removed stack before completing that order.
The front set contains two pads, and the rear set contains two shoes. Caliper rebuild parts, rear shoe springs and brake-rod hardware are separate choices. Inspect the relevant brake to decide which supporting pieces also need replacement.
It references 45530-404-315 for the stated 1977 application. A replacement master may have a different bore or internal design. Match its identity and rebuild specification before ordering; the motorcycle’s year alone cannot identify changed hydraulic parts.
The cable replaces reference 22870-374-000 for the CB550F. Higher bars or relocated controls can change the route and length needed. Compare end fittings and check that steering movement does not pull the cable tight or interfere with its operation.
Send your model and year, plus photos of your existing part and any changes to the original setup.
Select your exact model and year to narrow your results.
Choose your model and year.