Honda motorcycle parts
Choose your model and year to see parts listed for your bike.
Choose your model and year to see parts listed for your bike.
1977 Honda CB550F · Levers & clutch cable Buying guide
The standard brake and clutch levers use separate replacement references. Their pivot sets are also separate products, while the cable adjuster works at the clutch lever; compare these connections before choosing supporting hardware.
Standard clutch leverSilver lever with black rubber tip; replaces reference 53178-369-700.View part
Standard brake leverSilver lever with black rubber tip; replaces reference 53175-369-003.View part
CB550F clutch cableMade in Japan, replacing reference 22870-374-000 for the stated CB550F application.View part
Related parts: Clutch lever pivot bolt and nut · Brake lever pivot bolt and nut · 8 × 23 mm clutch lever cable adjuster
Each linked pivot set supplies one bolt and one nut, but the clutch bolt references 90114-310-000 and the brake bolt references 90114-300-000. Match the lever and its mounting before ordering. A worn perch or lever bore needs assessment alongside the bolt; replacement hardware alone does not establish the condition of the whole control.
The cable’s CB550F application and 22870-374-000 reference support the original-type replacement choice. Different bar height or a relocated perch can alter the required route. Compare the existing ends and length, and allow steering movement without cable tension; the linked lever adjuster has its own 8 × 23 mm dimensions to check.
It replaces reference 53175-369-003 for the listed applications. An aftermarket master can use a different lever pivot and contact shape. Compare its required lever specification before ordering rather than relying on the CB550F application alone.
The pivot bolt-and-nut sets are separate linked products. Choose the clutch-side or brake-side set by its reference and fitted mounting. Inspect the existing pivot and lever before deciding whether you need hardware in addition to the replacement lever.
The linked gold-anodized adjuster measures 8 × 23 mm and lists the CB550F application. Compare it with the existing adjuster and lever fitting before buying; a replacement perch can require a different thread or hardware arrangement.
Send your model and year, plus photos of your existing part and any changes to the original setup.
Select your exact model and year to narrow your results.
Choose your model and year.