Honda motorcycle parts
Choose your model and year to see parts listed for your bike.
Choose your model and year to see parts listed for your bike.
1976 Honda CB550F · Signals & Reflectors Buying guide
Separate the lens joint from the complete lamp and its wiring. The gasket and two-screw set suit the matching stock-style housing; the screw-on reflector instead needs the specified mounting thread.
Turn-signal lens gasketReplacement for reference 33406-377-671; suits the matching stock-style front and rear signal housings.View part
Lens screw set of twoTwo screws for the matching signal lens and housings; replaces reference 93500-04025-0A.View part
Screw-on reflectorStock-type reflector with a 6 mm mounting thread; replaces reference 33741-340-670.View part
The gasket and screw pair are matched to the stock-style front and rear signal housings and amber lens. Compare the existing lens profile and retaining positions before ordering them for a changed lamp. A custom signal may need its own seal and fasteners even when its shape looks similar.
A complete front or rear signal needs its voltage, connections and mount compared with the fitted motorcycle. Do not select it solely by lens colour. The featured reflector screws onto a 6 mm fitting, so check that mechanical connection independently of the lamp housing and wiring.
The gasket is a separate service part for the matching stock-style housing and lens. Compare the old seal’s profile and the lamp condition before ordering. A different aftermarket housing may need another gasket despite being fitted to a CB550F.
It contains two lens screws for the matching signal housing and lens application. Check the retaining arrangement on your lamp and count the positions being repaired before deciding the number of sets to order.
Check the mounting, voltage and wire arrangement at that position. The matching stock-style front lamp is described as 12-volt with two wires; the rear as 12-volt with one wire. Confirm the fitted connections, especially after a signal conversion.
Send your model and year, plus photos of your existing part and any changes to the original setup.
Select your exact model and year to narrow your results.
Choose your model and year.