My motorcycle Choose your Honda CB model

Search parts

Searching all Honda CB parts

Example: brake pads or oil filter.

Currently viewing Starter & Charging System

Honda motorcycle parts

Choose your model and year to see parts listed for your bike.

Honda CB Starter Motor Terminal Rubber Boot ~ Replaces 32411-230-000

$4.61 USD
73-0092
Replace your starter motor terminal cover with this Starter Motor Terminal (Cover) Rubber Boot, replacing OEM #32411-230-000.Key Features• Starter motor terminal rubber boot• Replaces...
Sold out
Honda CB750 CB550 CB500 CB400 CB350 rectifier regulator

Honda CB Rectifier/Regulator

$199.95 USD
24-2109
Replace your SOHC CB regulator and rectifier with this Rick's Electric OEM-Style Rectifier/Regulator. Combination unit replaces the OEM regulator and rectifier; stock-type plugs and...

Honda CB Starter Clutch Diode ~ Replaces 31700-124-003

$12.88 USD
24-2044
Replace your starter clutch diode with this Stator Clutch Diode/Rectifier, replacing OEM #31700-124-003 / #31700-166-008. Exceptionally broad fitment across the SOHC and DOHC CB750...

Honda CB Starter Solenoid Relay ~ Replaces 35850-375-000

$38.95 USD
24-2003
Replace your late-'70s CB starter solenoid with this Starter Solenoid Relay, replacing OEM #35850-375-000 / #35850-286-027. Broad fitment across the late SOHC CB750, CB500T/CB550...
Sold out
Honda CB750 CB550 rectifier regulator lithium ion battery compatible

Honda CB Rectifier/Regulator ~ Lithium Ion Battery Compatible

$199.95 USD
24-2011
Upgrade to a lithium-ion compatible charging regulator with this Rick's Electric Rectifier/Regulator. Designed with a lower voltage set point to work exclusively with lithium-ion...
New
Honda CB starter motor seal 60 x 1.4 31206-286-158

Honda CB Starter Motor Seal 60 x 1.4 ~ Replaces 31206-286-158

$5.95 USD
03-0784
Seal up your starter motor with this Starter Motor Seal, size 60 x 1.4, replacing OEM #31206-286-158 / #31206-402-008. Exceptionally broad fitment across the...
New
Honda CB starter motor seal 24.4 x 3.1 91312-MG7-003

Honda CB Starter Motor Seal 24.4 x 3.1 ~ Replaces 91312-MG7-003

$4.50 USD
03-0780
Seal up your starter motor with this Starter Motor Seal, size 24.4 x 3.1, replacing OEM #91312-MG7-003 / #91309-300-000 / #91309-425-003. Exceptionally wide fitment...

Honda CB Starter Motor Brush Set ~ Replaces 31201-292-158

$29.95 USD
24-2021
Replace your Mitsuba 2-brush starter motor brushes with this Replacement Starter Brush Set of 2, 12mm x 14mm x 6mm, 1 piece with insulated...
Sold out
Honda CB550F CB550K CB500K alternator cover gasket 11691-323-306

1971-78 Honda CB550F / CB550K / CB500K Alternator Cover Gasket ~ Replaces 11691-323-306

$9.86 USD
18-6999
Replace your CB500K or CB550 alternator cover gasket with this Alternator Cover Gasket, replacing OEM #11691-323-306.Key Features• Alternator cover gasket• Replaces OEM #11691-323-306• Honda...

1975 Honda CB550F · Starter & Charging Buying guide

Separate starter service from charging repairs

A starter brush set and a combined rectifier/regulator address different systems. Check the installed starter construction for brushes, then identify battery chemistry and mounting requirements before choosing a charging unit.

Check the motor before ordering brushes

The featured pair is for a Mitsuba two-brush starter and contains one insulated-lead brush and one non-insulated-lead brush. Compare the fitted motor and the stated brush dimensions before ordering. A solenoid fault or damaged cable needs a different repair from worn starter brushes.

Battery chemistry decides the regulator choice

The lithium-only unit has a 14 V ± 0.2 V set point and must be checked against the battery manufacturer’s requirements. It is not for a standard lead-acid battery. Both combined units may need custom mounting; plan the location and clearance while preserving the motorcycle’s starter safety circuit.

Buying questions

Does the brush set include both brush types?

Yes. It contains two 12 × 14 × 6 mm brushes: one with insulated leads and one with non-insulated leads. Confirm the installed motor is the specified Mitsuba two-brush type before choosing the set.

Which regulator should I choose for a lithium battery?

The lithium-only option uses a 14 V ± 0.2 V set point. Compare that value with your battery manufacturer’s charging requirements before selecting it. Its lithium label does not establish suitability for every battery sold as lithium.

Will the combined regulator use the original mounting without changes?

Custom mounting may be required. Compare the unit’s dimensions, 80 mm mounting centres, plugs and available space before ordering. Follow the product instructions and retain the starter safety circuit when planning the revised location.

Not sure which part you need?

Send your model and year, plus photos of your existing part and any changes to the original setup.

Ask a fitment question

Your cart

×