My motorcycle Choose your Honda CB model

Search parts

Searching all Honda CB parts

Example: brake pads or oil filter.

Currently viewing Handlebar

Honda motorcycle parts

Choose your model and year to see parts listed for your bike.

Honda OEM Type Closed-End Grips ~ Replaces 95011-14100

$16.95 USD
02-2424
Fit the correct grips on your earliest-era Honda with these Honda OEM-Type Rubber Grips. Accurate replicas of the factory grips fitted to the oldest...

Honda CB Black Handlebar Clamp Set/2 ~ 7/8 in. ~ Replaces 95014-22200

$32.95 USD
73-1120
Secure your handlebars with confidence using this Black Handlebar Clamp Set. Designed for 7/8" bars, these clamps replicate the stock look and function while...

1975 Honda CB500T · Handlebar Buying guide

Clamps for the bar, grips for your hands

Use the clamp set when the bar is loose in the top clamp. Use the grips when the rubber is torn or you need the closed-end shape. Both are sized for 7/8 in. handlebars. Neither description is a handlebar.

Clamps pinch, grips cover the ends

Clamps pinch the bar in the upper triple clamp. They are black, a set of two, and they replace 95014-22200. Fitment names the 1975-76 CB500T Twin plus earlier CB750K and several CB550 and CB400 models. Grips are black, closed-end, 130mm, for the same bar. One order does not include the other.

One grip length, two Honda numbers

One grip length is printed: 130 mm, black, closed-end, for 7/8 inch bars. Honda 95011-14100 and 95011-14200 are that same grip. Check the quantity so both ends are covered.

Clamps or closed-end grips?

Do the clamps fit a bar thicker than 7/8 in.?

The clamp set is for 7/8 in. bars and fits the upper triple clamp. No larger diameter is offered. The 1975-76 CB500T Twin is named, with other models that use that bar size. Measure the bar before you order.

Are the grips open at the end?

No. They are closed-end black rubber, 130mm long, for 7/8 in. bars. They replace 95011-14100 and 95011-14200, and they name the 1975-76 CB500T. If you need an open end or a different length, this description does not offer one.

Does the clamp set include the grips?

No. The clamp set replaces 95014-22200 and holds the bar. The grips are a separate closed-end rubber piece at 130mm. Both name the 1975-76 CB500T and both are for 7/8 in. bars. Add each one only if that piece is what you are replacing.

Not sure which part you need?

Send your model and year, plus photos of your existing part and any changes to the original setup.

Ask a fitment question

Your cart

×