VintageCB750 Supplying CB Riders Since 2010

About Us Why Us? Reviews Shipping Info Returns Contact Us
Wish Lists
0 My Cart

Your cart is currently empty.

Browse all parts
Total (USD): $0.00
View cart
Menu
Search
Wish
Cart 0
My motorcycle Choose your Honda CB model

Search parts

Searching all Honda CB parts

Example: brake pads or oil filter.

1969 Honda CL350K1 Alternator Rotor Puller

The alternator rotor puller offered for the 1969 Honda CL350K1 has a 16 × 1.5 thread. Match it to the rotor installed and the planned removal job, especially where an engine or alternator component has been substituted during earlier repairs.

Close ×
Your saved bike Choose your Honda CB model

Shop By Category

Most orders ship same or next business day Fitment guarantee Listed for your exact model and year? We’ll make it right if it doesn’t fit as described. Mechanic-backed support Ask our team for help choosing the right Honda CB part.
Currently viewing Engine, Steering & Clutch Tools

Honda motorcycle parts

Choose your model and year to see parts listed for your bike.

New
Honda CB350 CL350K0 CL350K1 CL350K2 alternator rotor puller 16 x 1.5

Honda CB Alternator Rotor Puller ~ 16 x 1.5

$39.95 USD
99-4937
Specialty puller tool for removing the alternator rotor on your CB350/360 without damaging the rotor or crankshaft during the process. A proper rotor puller...
compare

1969 Honda CL350K1 · Rotor Removal Tool Buying guide

Confirm the puller thread at the fitted rotor

Use the complete 16 × 1.5 thread specification when selecting this puller. It identifies both diameter and pitch, while the service procedure establishes how the correct tool is prepared and used.

Parts to consider

Honda CB Alternator Rotor Puller ~ 16 x 1.5 Threaded alternator rotor pullerSpecialty rotor-removal tool with a 16 × 1.5 thread. Check the rotor application separately from the motorcycle’s frame designation.View part

Resolve uncertain rotor identity before ordering

If you cannot identify the rotor, gather its markings and photographs before requesting a tool application check. A previous owner may have replaced an engine or alternator component. Confirming the assembly avoids treating a broad motorcycle application as a complete thread specification.

Use the manual for the removal method

The puller’s product size identifies the offered tool; it does not supply the whole removal procedure. Consult the correct service information for preparation and use. If threads or tool engagement appear questionable, have them assessed rather than attempting to compensate with an improvised method.

Common buying questions

Is matching the thread diameter enough?

No. Check the complete thread specification and the tool application for the fitted rotor. The stated 16 × 1.5 size includes a pitch figure, so diameter alone leaves an important part of the comparison unresolved.

Can the puller remove a rotor from a replacement engine?

Only if that rotor takes the same tool and complete thread specification. Identify the replacement engine and rotor first; the CL350 frame designation does not establish which alternator components are now fitted.

What should I do before attempting removal?

Confirm that the puller is appropriate for the fitted rotor and read the applicable service procedure. If the thread condition or engagement is uncertain, get it assessed before using force on the assembly.

Not sure which part you need?

Send your model and year, plus photos of your existing part and any changes to the original setup.

Ask a fitment question
Parts categories for 1969 Honda CL350K1

Your cart

×