Honda motorcycle parts
Choose your model and year to see parts listed for your bike.
Choose your model and year to see parts listed for your bike.
1971 Honda CB450K · Ignition Systems, Coils & Plugs Buying guide
Left points use the 30204-292 references and right points use the 30203-292 references. The coil is sold individually with wires attached. A condenser and plug cap are separate choices, and the round-plug switch is intended for the stated round harness connection.
Left-side contact pointLeft ignition point referencing Honda 30204-292-003 / 30204-292-154. Compare the point on that side of the fitted ignition. The description does not identify a supplied left-and-right point package.View part
Right-side contact pointRight ignition point referencing Honda 30203-292-003 / 30203-292-154. Match the side and component being renewed; its reference differs from the separately listed left point.View part
Individually sold single-output coil12V coil with a 5-ohm primary and attached wires, sold each. The spark plug wire is 19 inches long and mounting centres approximately 80mm. Compare the full lead and mounting arrangement with the coil being removed.View part
Related parts: Condenser with Honda replacement references · Aftermarket cap for restoration or custom work · Round-plug ignition switch
The coil gives a 6.5-inch blue wire with dual female bullet connector and a 5.25-inch black/white wire with male bullet connector. Its beige-Honda-coil replacement note requires reversed mounting because the exits differ. Assess those paths alongside the mounting centres rather than selecting it from bracket spacing alone.
The YB05F cap is an aftermarket part sold each for restoration or custom work. Its description does not document resistance or plug-terminal dimensions. Confirm the required values and connections for the ignition fitted; neither the model name nor the coil’s primary resistance resolves that choice.
Use the separately identified left and right products and their different Honda references. Neither description states that it supplies a pair. Confirm supplied quantity if necessary and add the condenser only if that separate component is part of the planned service.
The switch specifies a round six-hole, four-wire plug and a round harness connector for its CB450K application. Compare the connector shape and connection arrangement as well as the wire count. A previously altered harness needs a direct comparison before ordering.
It names Honda 30250-369-004 / 30280-292-672 / 30280-292-671 and the motorcycle applications. Compare the condenser’s attachment and connection with the ignition retained on the bike. Its description does not itemize a combined points-and-condenser service kit.
Send your model and year, plus photos of your existing part and any changes to the original setup.
Select your exact model and year to narrow your results.
Choose your model and year.