My motorcycle Choose your Honda CB model

Search parts

Searching all Honda CB parts

Example: brake pads or oil filter.

Currently viewing Cables

Honda motorcycle parts

Choose your model and year to see parts listed for your bike.

Honda CB Tach Drive Plug Block Off w O-Ring

$22.95 USD
73-0884
Block off your tach drive cleanly with this Tach Drive Plug (Block Off) with O-ring. This plug is generally used when the tachometer cable...

Honda CB750 / CB550 / CB500 / CB400 Tachometer Cable Clamp ~ Replaces 50462-323-010

$7.00 USD
29-7004
Replace your worn tachometer cable clamp with this Chrome Tachometer Cable Clamp, replacing OEM #50462-323-010.Key Features• Chrome tachometer cable clamp• Replaces OEM #50462-323-010• Honda...

Honda CB Speedometer Cable ~ Replaces 44830-425-870

$22.66 USD
51-2304
Replace your CB speedometer cable with this Speedometer Cable in black, replacing OEM #44830-425-870. End-to-end length 38.5". Made in Japan.Key Features• Speedometer cable, black•...

Honda CB1000/CB900/CB750/CB650 Speedo Gear Plug

$43.95 USD
29-0538
Keep your speedo drive gear clean with this Speedo Gear Plug, 15mm outer diameter, 22mm long.Key Features• Speedo gear plug• 15mm outer diameter, 22mm...

Honda CB Tach Drive Plug Block Off ~ Black ~ Joker Machine

$39.95 USD
73-1075
Block off your tach drive cleanly with this Joker Machine Brand Black Tach Drive Plug (Block Off). This plug is generally used when the...

1976 Honda CB550K · Cables Buying guide

Separate replacement cables from drive-delete parts

The speedometer cable has a stated end-to-end length; the tach clamp is hardware rather than a cable. Block-off plugs serve a different setup where a mechanical cable is removed, and need comparison with the retained drive connection.

Choose a cable by ends and routing

The black speedometer cable replaces reference 44830-425-870 and is listed at 38.5 inches end to end. Compare both connections and the current routing, including any changed instruments or bars. The separate chrome tachometer clamp should not be mistaken for a supplied replacement cable.

Check plugs only for the planned setup

The tach block-off with O-ring is described for a removed mechanical tach cable and specifies an approximately 15 mm fitting, 10.5 mm groove and screw retention. The speedometer gear plug is separate, with its own dimensions. Match the actual retained drive instead of treating both plugs as interchangeable.

Common questions

Does the tachometer clamp include a tach cable?

No cable is specified in the clamp listing. It is a chrome clamp replacing reference 50462-323-010. Compare the existing clamp and mounting position; the speedometer cable and drive-plug products are separate choices in this category.

Is a tach-drive plug needed with a working mechanical cable?

The block-off listing describes use when the mechanical tachometer cable has been removed. Decide which instrument and cable will remain before choosing it, then compare the fitting and retention details with the motorcycle’s actual drive.

Does the black Joker plug establish that an O-ring is included?

Its description establishes a machined O-ring groove but does not expressly list a supplied O-ring. The other featured plug explicitly says it comes with an O-ring. Confirm the black plug’s supplied contents before assuming they match.

Not sure which part you need?

Send your model and year, plus photos of your existing part and any changes to the original setup.

Ask a fitment question

Your cart

×