Honda motorcycle parts
Choose your model and year to see parts listed for your bike.
Choose your model and year to see parts listed for your bike.
1974 Honda CB550K · Ignition Buying guide
Points, coils and the key switch solve different repair needs. Compare the existing ignition arrangement before ordering a coil set or conversion, and distinguish the components included from those you will reuse.
Stock-layout coil and cap setTwo coils, two straight caps, two angled caps and mounting fasteners; supplied as a set without spark plugs.View part
Right-hand contact pointOne right-side point for cylinders 2 and 3, replacing 30204-300-005.View part
Square four-prong ignition switchSwitch for a square harness connector, replacing 35100-374-007 and the other references in its listing.View part
Related parts: Left-hand contact point · Ignition condenser · Dyna S module only
The replacement-style coil kit supplies two straight and two angled plug caps, alongside two coils and mounting bolts and nuts. Compare their shape, terminals and lead routing with the motorcycle. Separate caps may be useful for a smaller repair, but they are not spark plugs.
The Dyna S listing is the module-only option, intended for owners with suitable coils. Its stated requirement is stock coils or coils rated at least 3 ohms. Verify your installed components and follow the ignition instructions rather than treating every replacement coil as a suitable conversion partner.
Each side is listed as one piece. The right-hand part serves cylinders 2 and 3; the left-hand part serves cylinders 1 and 4. Check which side you need, or order the two separate listings for both sides.
The condenser lists CB550K fitment, but its quantity note specifically refers to the CB750. Confirm the required CB550K quantity from your installed assembly or the model’s parts diagram; do not treat that note as a supplied pair.
This switch is specifically the square four-prong version and lists the 1974–76 CB550K with that connector. Compare your actual harness plug before ordering, especially if wiring or the ignition switch has been changed previously.
Send your model and year, plus photos of your existing part and any changes to the original setup.
Select your exact model and year to narrow your results.
Choose your model and year.