Honda motorcycle parts
Choose your model and year to see parts listed for your bike.
Choose your model and year to see parts listed for your bike.
1977 Honda CB550F · Fork service tools Buying guide
The seal driver and cap wrench serve separate jobs. One compares with the fork tube and seal installation, while the other compares with the cap interface; a replacement front end can change either requirement.
The split seal driver is described for 35 or 36 mm conventional or inverted forks. Confirm the actual diameter and tool engagement before choosing it for changed forks. It is an installation tool; the fork oil seals and dust protection are separate parts to inspect and order for the specific rebuild.
The 24 mm wrench lists the stock CB550F cap application and has a non-marring design. Compare the cap fitted to your bike, especially after replacing caps or the complete front end. The fork’s 35 mm tube size does not specify the cap’s wrench size; use the appropriate procedure when removing spring-loaded caps.
No. It describes the cap interface the wrench engages. The seal driver is chosen separately by its stated 35 or 36 mm application. Measure the relevant surfaces rather than using one tool dimension to choose both products.
Choose it only if the replacement cap has the required 24 mm interface and the wrench can engage correctly. The original CB550F application does not identify every custom cap. Compare the cap manufacturer’s tool requirement before ordering.
The split tool is described for 35 or 36 mm conventional or inverted forks. Confirm the replacement fork’s actual diameter and engagement requirements. The CB550F model name alone does not establish which driver fits a converted front end.
Send your model and year, plus photos of your existing part and any changes to the original setup.
Select your exact model and year to narrow your results.
Choose your model and year.