Honda motorcycle parts
Choose your model and year to see parts listed for your bike.
Choose your model and year to see parts listed for your bike.
1976 Honda CB550F · Engine Buying guide
A service filter, a gasket for an opened joint and a measured piston replacement are different purchases. Start with diagnosis and the work planned, then count the individual pieces and compare the sets available.
Stock-type paper oil filterReplacement element for the original filter housing; spring, washers and O-rings are separate.View part
Nine-piece engine oil seal kitCB550 seal kit covering listed clutch, gearshift, crankshaft, shaft and tach-drive sealing points.View part
Standard 58.5 mm piston kitOne piston, rings, pin and two clips per kit. Four kits cover all four pistons.View part
Related parts: Athena overhaul gasket set · Athena top-end gasket set
The linked Athena overhaul and top-end sets offer different starting points for gasket work. Compare their contents with the joints being opened, then check which oil seals need attention. The nine-piece seal kit is a separate product; its contents should be matched to the repair rather than assumed part of a gasket order.
When ordering drivetrain pieces, identify their location first. Cam-drive supports belong to the valve-timing system; the primary chain and its dampers are internal engine parts. Rear-chain adjusters work at the wheel. Broad category placement does not make those three groups interchangeable or identify the cause of engine noise.
Each 58.5 mm kit contains one piston, its rings, a pin and two clips. For all four pistons, order four suitable kits after checking the measured cylinders; a single package is not a four-cylinder rebuild set.
Compare the joints and shafts being serviced with the package contents. Top-end and overhaul gasket sets are different choices from the nine-piece oil seal kit. Add individual parts only after checking what your selected set provides.
The featured paper element belongs to the original filter-housing arrangement. A spin-on conversion needs the specified cartridge for that conversion. Check the filter system installed on the engine before ordering an element or its service hardware.
Send your model and year, plus photos of your existing part and any changes to the original setup.
Select your exact model and year to narrow your results.
Choose your model and year.