Honda motorcycle parts
Choose your model and year to see parts listed for your bike.
Choose your model and year to see parts listed for your bike.
1975 Honda CB550F · Levers & clutch cable Buying guide
A lever must suit its pivot and operating connection, not just its finish. Choose the brake and clutch sides separately, and compare the replacement cable ends and route with the controls installed on the bike.
Stock-type clutch leverSilver lever with black rubber tip. Replaces reference 53178-369-700.View part
Stock-type brake leverSilver lever with black rubber tip. Replaces reference 53175-369-003.View part
CB550F clutch cableMade in Japan for the CB550F and CB550K. Replaces reference 22870-374-000.View part
Related parts: Clutch lever pivot bolt and nut · Brake lever pivot bolt and nut · Clutch cable lever adjuster
The featured silver levers with black tips are separate brake- and clutch-side replacements. Their pivot sets are also separate: each linked set contains one bolt and one nut. Compare the pivot and operating end with your original, particularly when the perch or front master cylinder is no longer the factory arrangement.
The replacement cable is listed for the 1975 CB550F. Check its end fittings and follow the correct route around the steering head. Changed handlebars may need a different length; confirm that the cable can move with the steering without being pulled tight, then use the Honda manual for adjustment checks.
They are separate products with different operating ends and references. The clutch lever replaces 53178-369-700; the brake lever replaces 53175-369-003. Select the side you need, and add the other if you want matching silver levers with black tips.
The linked pivot hardware is supplied separately from the featured levers. Each set contains one bolt and one nut. Brake and clutch sets have different references, so inspect the existing hardware and order the correct side.
The gold-anodized lever adjuster has stated dimensions of 8 × 23 mm and is listed for the CB550F. Compare the existing adjuster and lever fitting before ordering; an aftermarket perch can use different hardware.
Send your model and year, plus photos of your existing part and any changes to the original setup.
Select your exact model and year to narrow your results.
Choose your model and year.