Honda motorcycle parts
Choose your model and year to see parts listed for your bike.
Choose your model and year to see parts listed for your bike.
1972 Honda CB500K · Levers, Pivots & Cable Buying guide
The silver brake and clutch levers use different Honda references. Their pivot bolt-and-nut sets are also separate listings. The CB500K clutch cable provides one cable, so none of these choices should be counted as a complete control assembly.
Silver clutch lever with black tipClutch-side lever referenced to 53178-369-700.View part
Silver brake lever with black tipSeparate brake-side lever referenced to 53175-369-003.View part
Japanese-made CB500K clutch cableOne cable supplied for the listed 1972 application; compare Honda reference 22870-323-020.View part
Related parts: Clutch-side pivot hardware · Brake-side pivot hardware
The pivot listings provide a bolt and nut for the appropriate side. Replacing the bolt alone does not remove wear in a lever bore or perch, as the clutch-pivot source explains. Compare the remaining components before adding hardware, especially where a nonoriginal master cylinder is fitted.
The CB500K cable page identifies one cable and excludes the lever, adjusters, engine-side release arm and brackets. Check the ends and existing path before ordering. If the handlebars have changed, compare that routing rather than assuming every replacement cable follows the same path without checking.
The brake lever references 53175-369-003, while the clutch lever references 53178-369-700. Compare the fitted perch and pivot shape as well as the side required. Their shared silver finish with black tips does not establish compatibility with replacement controls.
The brake bolt references 90114-300-000 and the clutch bolt references 90114-310-000; each set supplies one bolt and nut. Compare diameter, shoulder length, thread and fitted perch instead of assuming interchange. Aftermarket controls may use different pivot hardware.
Match Honda reference 22870-323-020, the explicit 1971–73 CB500K application, cable ends and existing routing. One Japanese-made cable is supplied. The lever, adjusters, release arm and brackets are separate; compare those adjoining parts when the controls have been changed.
Send your model and year, plus photos of your existing part and any changes to the original setup.
Select your exact model and year to narrow your results.
Choose your model and year.