Honda motorcycle parts
Choose your model and year to see parts listed for your bike.
Choose your model and year to see parts listed for your bike.
1971 Honda CB500K · Starter & Charging Buying guide
The starter relay operates the starting circuit, while the brush set services a compatible starter motor. Combined rectifier/regulators address charging equipment. Their functions and fitment checks differ; use the fault and installed component to guide the purchase.
Starter solenoid relayA starting-circuit relay cross-referenced to Honda 35850-371-670, 35850-306-670 and 35850-HA7-670. Check the relay and cable connections against the installed arrangement.View part
Mitsuba two-brush starter setIncludes two 12 x 14 x 6 mm brushes, one with insulated leads and one with non-insulated leads. Intended for the listed Mitsuba two-brush starter.View part
Combined rectifier/regulatorRick's unit combines the regulator and rectifier functions. It measures 68 x 94 x 26 mm with 80 mm mounting-hole centres; custom mounting may be required.View part
Related parts: Lithium-ion-only rectifier/regulator
The featured brush set is specifically for a Mitsuba two-brush starter and contains one brush with insulated leads and one with non-insulated leads. Compare the motor and worn brushes before ordering. The relay is separate equipment and does not service the motor’s internal brushes or seals.
The lithium-ion-compatible regulator is explicitly not for standard lead-acid batteries. Confirm its charging requirements against the battery manufacturer’s specifications. The regular and lithium-specific units also have stated dimensions and mounting spacing; neither listing is a promise that every mounting location will fit without adaptation.
It contains two 12 x 14 x 6 mm brushes: one with insulated leads and one with non-insulated leads. Confirm that the installed starter is the listed Mitsuba two-brush type before ordering the set.
Allow for a 68 x 94 x 26 mm body and mounting holes 80 mm centre to centre. The unit replaces regulator and rectifier functions together, with stock-type plugs, but its listing allows for custom mounting.
No. Its listing specifies lithium-ion batteries only and excludes standard lead-acid batteries. The stated set point is 14.0 V ±0.2. Confirm that charging requirement with the battery manufacturer before choosing the unit for your installed battery.
Send your model and year, plus photos of your existing part and any changes to the original setup.
Select your exact model and year to narrow your results.
Choose your model and year.