Honda motorcycle parts
Choose your model and year to see parts listed for your bike.
Choose your model and year to see parts listed for your bike.
1971 Honda CB500K · Battery Mounts & Cables Buying guide
The battery band retains the battery, the box rubber provides cushioning, and the positive cable carries its electrical connection. These are separate parts with different checks. Match measurements and cable polarity rather than treating them as one battery kit.
Stock-type battery hold-down bandReplaces Honda reference 95012-17001. The stated 6.125-inch or 155 mm length is measured from inside bracket to inside bracket.View part
Positive battery cableOne positive cable with rubber end covers, replacing Honda reference 32401-323-000. The battery and negative cable are separate.View part
Battery box cushioning rubberReplaces Honda reference 83618-323-000. Sold individually; order the quantity required after inspecting the battery box.View part
The band measurement is not an arbitrary overall rubber length: the listing specifies 155 mm between the inside faces of the brackets. Compare those same points on the existing support. A changed battery or tray also needs a clearance check before assuming the original-style band will secure it.
Replacing a battery cable does not renew the hold-down band or box rubbers. Inspect the tray and support pieces as well as the cable end covers and terminal condition. The positive cable listing supplies one cable, while the cushioning rubber is sold individually; build the order around the actual missing pieces.
Each purchase supplies one cushioning rubber replacing Honda 83618-323-000. Inspect the support positions and count the pieces needing replacement before ordering. The listing does not provide a complete-box quantity, so do not infer one from the motorcycle model.
The listing states 6.125 inches, or 155 mm, from inside bracket to inside bracket. Use the same reference points when comparing the old band. A different measurement across the rubber alone may give a misleading comparison.
Honda 32401-323-000 identifies the listed positive cable for the 1971 CB500K. One cable with rubber end covers is supplied. Compare its polarity, terminals and route with the existing connection before selecting it for the repair.
Send your model and year, plus photos of your existing part and any changes to the original setup.
Select your exact model and year to narrow your results.
Choose your model and year.