This engine service tool is relevant to a 1980 Honda CB650C Custom only when the matching aftermarket spin-on oil filter is installed. Identify the filter arrangement first, then choose the tripod wrench for that conversion rather than the original housing.
Remove and install spin-on oil filters with this 3/8" Drive Tripod Oil Filter Wrench. Designed for our aftermarket spin-on cartridge oil filters.Key Features• 3/8"...
Install 35mm or 36mm fork seals cleanly with this 35/36mm Fork Seal Driver. High-quality carbon steel with split design. Use for easy installation of...
1980 Honda CB650C Custom · Engine Service Tool Buying guide
Choose the wrench for the filter actually installed
The tripod wrench is specified for the store’s aftermarket spin-on filter. That conversion is offered for the CB650C, but its availability does not mean your motorcycle has it fitted. Check the current filter before ordering.
The matching chrome spin-on filter is an aftermarket conversion that replaces the original housing, filter bolt and paper element. Its application includes the 1980 CB650C. Use this wrench only when that matching spin-on arrangement is installed, not simply because the frame model appears in the category.
Prepare for the specific spin-on service
The tripod wrench uses a 3/8-inch drive and is intended for the specified aftermarket spin-on cartridge filters. Confirm the fitted filter matches that application. Use the wrench for controlled removal when needed, and follow the filter or adapter manufacturer’s fitting instructions.
Buying questions
Which filter must be fitted before this wrench is useful?
The CB650-family application for wrench 35-9022 specifies aftermarket spin-on filter 15-1006. It does not service the original center-bolt housing and paper element. Check the filter actually fitted, including its identity after an unknown conversion, before ordering.
Should I use the wrench to tighten the spin-on filter as firmly as possible?
No. Follow the filter or adapter manufacturer’s installation procedure and do not overtighten. The wrench’s product guidance describes it as mainly useful for controlled removal when the filter cannot be loosened by hand, not as a reason to add extra installation force.
Does a different spin-on filter automatically take the same wrench?
No universal fit is established. Verify the replacement filter and its tool requirements separately; the wrench’s 3/8-inch drive specifies the connection to your wrench equipment, not the dimensions of every filter it can engage.
Not sure which part you need?
Send your model and year, plus photos of your existing part and any changes to the original setup.