Honda motorcycle parts
Choose your model and year to see parts listed for your bike.
Choose your model and year to see parts listed for your bike.
1982 Honda CB650 · Drive-Chain Adjusters Buying guide
The complete adjuster set renews two adjuster positions with the stated bolts and nuts. Inspect the surrounding fittings and mounting surfaces too; those checks determine whether the listed package addresses the repair or additional components need separate attention.
The adjuster set replaces 40543-425-000 and supplies two adjusters, two adjusting bolts and two nuts. List what is damaged or missing before ordering. Compare that six-piece package with the fitted hardware instead of assuming it includes every component around the rear axle.
The 50-link primary chain serves the internal engine drive and cannot replace the external rear-wheel chain. For axle-adjustment work, compare the featured adjuster set with the hardware on the motorcycle. Confirm the rear-chain specification independently when a chain replacement is also planned.
No. Use both adjusters evenly, verify rear-wheel alignment with an accurate method and set chain slack to the Honda specification. Worn or mismatched index marks are not enough to establish alignment.
Check the drive chain, both sprockets, axle, wheel bearings and adjuster seating. Tighten the axle and adjuster hardware using the service-manual procedure, then recheck chain slack after the axle is secured.
The set replaces 40543-425-000 and lists the standard 1982 CB650. Compare that reference, the two adjuster positions and the fitted fasteners, especially if the swingarm or axle arrangement has changed.
Send your model and year, plus photos of your existing part and any changes to the original setup.
Select your exact model and year to narrow your results.
Choose your model and year.