Honda motorcycle parts
Choose your model and year to see parts listed for your bike.
Choose your model and year to see parts listed for your bike.
1981 Honda CB750F · Fuel System Buying guide
Start with the assembly being serviced. A carburetor kit renews internal parts; intake holders restore an engine-side connection; a petcock must match the fitted tank. Identify the work first so each purchase has a clear place in the repair.
Supersport carburetor rebuild kit48-1998 includes a bowl gasket, float needle, O-rings, primary and secondary jets, pilot and slow jets, rubber plug, and mixture screw with spring.View part
Four carburetor holders48-0756 is the engine-side holder set. It lists Honda references 16214-425-000, 16213-425-000, 16212-425-000 and 16211-425-000; compatible clamps are separate.View part
Threaded fuel petcock20-8041 lists the 1981 CB750F and an M18 x 1.0 tank thread, replacing Honda 16950-MA4-671 or 16950-461-771.View part
Related parts: Stock-airbox filter · Twelve connector-tube O-rings · Throttle pull cable
Basic kit 48-1402 lists a float-bowl gasket, float needle and O-rings. It is a narrower service package than the Supersport kit shown above. Each kit services one carburetor, so base the order on both the required contents and the number being rebuilt.
Stock-type filter 15-0069 replaces Honda 17211-425-000 in the original airbox. Pull cable 51-2580 is listed as 47 inches overall and replaces 17910-425-020, 17910-425-030 or 17910-425-405. Compare the existing cable ends and routing if the bars or controls have changed.
Yes. The guidance for set 73-0831 says the carburetors must be separated enough to remove the fuel connector tubes and accelerator tube and replace their O-rings. Allow for that access when planning the job, rather than treating it as a float-bowl-only service.
The 15-0037 pod-filter guidance calls for checking jetting, mixture, synchronization and throttle response after the change in intake restriction. Main-jet assortment 48-2111 offers several sizes for compatible Keihin carburetors after intake or exhaust changes; select from them through tuning the actual setup rather than assuming a supplied rebuild-kit jet settles the choice.
Send your model and year, plus photos of your existing part and any changes to the original setup.
Select your exact model and year to narrow your results.
Choose your model and year.