Honda motorcycle parts
Choose your model and year to see parts listed for your bike.
Choose your model and year to see parts listed for your bike.
1971 Honda SL350K1 · Ignition Parts Buying guide
These parts cover switching, the condenser, contact points and coils. A service order should follow the components actually needed, with left/right point identity and coil requirements checked before finish or price.
Left-side contact pointLeft-side point with replacement references 30204-286-004 and 30202-369-154.View part
Right-side contact pointRight-side point with replacement references 30203-286-004 and 30203-369-154.View part
Ignition condenserReplacement condenser with references 30250-369-004, 30280-292-672 and 30280-292-671.View part
Related parts: Single-output ignition coil · Round-plug ignition switch
The left-side point carries references 30204-286-004 and 30202-369-154; the right-side point carries 30203-286-004 and 30203-369-154. Compare the fitted point and its position before ordering. A matching family name does not make a left-side part the right replacement for the other position.
The related coil has a 19-inch spark-plug wire, a 6.5-inch blue lead with a dual female bullet connector and a 5.25-inch black/white lead with a male bullet. Compare those connections and its approximately 80 mm mounting centers; wire exits may require a different orientation from a beige Honda coil.
The left and right points are separate products with different reference numbers. Identify the position being serviced and compare the removed part; do not double the quantity of one side to build a left-and-right order.
The related replacement coil specifies 5-ohm primary resistance, while the high-output option specifies 3.3 ohms. Compatibility depends on the ignition in use as well as mounting and wiring; the output label is not a substitute for those checks.
Yes. The condenser is its own product, carrying references 30250-369-004, 30280-292-672 and 30280-292-671. Match the required reference and mounting arrangement, then add the left or right points separately if the repair requires them.
Send your model and year, plus photos of your existing part and any changes to the original setup.
Select your exact model and year to narrow your results.
Choose your model and year.