Honda motorcycle parts
Choose your model and year to see parts listed for your bike.
Choose your model and year to see parts listed for your bike.
1985 Honda CB450SC Nighthawk · Oil Service Buying guide
The paper element is listed by three Honda references. The magnetic plug uses M14 × 1.5 threads, and the genuine Honda switch needs a matching reference, terminal and sealing arrangement. Individual filter washers, the drain washer and the separate housing bolt provide focused replacement choices.
Paper replacement filterOne element matches 15412-413-005, 154A1-413-005 and 154A1-MA6-000. Compare the fitted element with those references before completing the filter order.View part
Genuine warning-light switchThe Honda switch lists 35500-MJ4-024 among five replacement references and includes the 1985 CB450SC. One switch is supplied; verify actual oil pressure and wiring before attributing an illuminated warning light to it.View part
M14 × 1.5 magnetic drain plugThe plug replaces 92800-14000 and attracts ferrous debris. A washer appears beside it in the photo, but the written supply information does not promise an included washer.View part
Related parts: Replace one worn filter washer · Renew the separate drain washer · Match the filter housing bolt
The 15414-300-000 filter washer is offered individually or in a five-pack. Inspect the removed washer for cupping, cracks, deep scoring or flattening rather than adding replacements by habit. The housing bolt replaces 15420-413-000; its written listing does not specify included extra hardware, so confirm what arrives before the job.
The separate washer measures 14 mm inside, 20 mm outside and 1 mm thick, with one used at the engine drain plug. Renew it whenever the plug is removed. Check the sealing requirement and supply with the magnetic plug rather than counting the loose washer in its photo as a guaranteed inclusion.
Inspect it after removal for cupping, cracks, deep scoring or flattening. Those conditions justify replacement with the matching 15414-300-000 washer. Keep the Honda-specified filter-bolt position and tightening procedure; the washer’s appearance does not establish a different location or repair method.
Its magnet captures ferrous steel particles but does not collect aluminum. Verify the M14 × 1.5 thread and Honda 92800-14000 match before choosing the plug, and confirm the sealing-washer supply separately from the photograph.
Compare the removed bolt with Honda reference 15420-413-000 and confirm the supplied contents before ordering. The bolt is offered as a separate product, but the written description does not identify accompanying washers or other hardware needed for your particular repair.
Send your model and year, plus photos of your existing part and any changes to the original setup.
Select your exact model and year to narrow your results.
Choose your model and year.