My motorcycle Choose your Honda CB model

Search parts

Searching all Honda CB parts

Example: brake pads or oil filter.

Currently viewing Turn Signal Lamps, Stems, Lenses & Reflectors

Honda motorcycle parts

Choose your model and year to see parts listed for your bike.

Honda CB Stock Type Reflector ~ Replaces 33741-340-670

$21.46 USD
11-2303
Restore your mid-'70s Honda's stock reflectors with this Stock-Type Screw-On Reflector with a 6mm thread, replacing OEM #33741-340-670. Broad fitment covering the 1972-78 CB750...
New
Honda CB750 CB550 CB500 CB400 headlight stay headlight reflector bolt 90120-377-000

Honda CB750 / CB550 / CB500 / CB400 Headlight Stay / Headlight Reflector Bolt ~ Replaces 90120-377-000

$8.95 USD
99-4977
Upgrade or restore your classic Honda motorcycle headlight system with this Headlight Stay / Headlight Reflector Bolt — designed to secure the headlight reflector...
New
Honda CB750 CB550 CB500 headlight reflector rubber base 33743-375-000

Honda CB750 / CB550 / CB500 Headlight Reflector Rubber Base ~ Replaces 33743-375-000

$12.95 USD
99-4976
Replacement rubber base for restoring your CB750's headlight assembly back to proper condition. This is the rubber mount that the headlight reflector attaches to...

Honda CB Turn Signal Lamp Gasket ~ Replaces 33406-377-671

$4.61 USD
11-2084
Replace the gasket on your turn signal with this Turn Signal Lamp Gasket, replacing OEM #33406-377-671. Pairs with our signal lamps #11-2114 and #11-2149...

Honda CB Turn Signal Lamp Lens Screw Set ~ Replaces 93500-04025-0A

$2.95 USD
73-1034
Replace your turn signal lens screws with this Turn Signal Lamp Lens Screw Set of 2, replacing OEM #93500-04025-0A.Note: also fits our signal lens...

Honda CB750 / CB550 / CB450 / CB400 Rear Turn Signal Rubbers Pk/2 ~ Replaces 33606-371-000

$15.95 USD
73-0834
Replace your rear turn signal rubbers with this Rear Turn Signal Rubbers Pk/2, replacing OEM #33606-371-000. These are the rubbers that go under the...

1977 Honda CB550K · Turn Signal Lamps, Stems, Lenses & Reflectors Buying guide

Match the signal housing and its mounting pieces

Lamp gaskets and lens screws serve the housing, while the rear rubbers sit under the signal stays. Side reflectors and their bases are separate choices, with different mounting details to compare.

Order by the part of the lamp being repaired

The signal gasket and two-screw set each identify matching lamp and lens listings. Use those references and the installed housing shape when replacing small parts. A broad motorcycle fitment list does not show that a gasket or screw set will match a custom signal already on the bike.

Distinguish a pack from both sides of the bike

The rear stay rubber pack contains two pieces, and the listing describes two rubbers for each rear signal. Work from the number of stays being repaired rather than assuming one pack covers both signals. Reflector bases and bolts are separately sold pieces, so check their condition and quantity too.

Common buying questions

Is one rear rubber pack enough for both rear signals?

The product is a pack of two and states that each rear signal uses two rubbers. Count the signals and mounting pieces you are replacing, then choose the required packs; the package quantity alone does not mean a full-bike set.

Do the gasket and lens screws suit any replacement signal?

Their descriptions name specific matching signal lamps and a lens. Compare your installed signal with those products before purchasing. A custom or substituted housing needs its own gasket shape and screw comparison rather than a year-only choice.

Is the screw-on reflector a turn-signal lamp?

No. The reflector is a separate stock-type screw-on part with a stated 6 mm thread. Match it to its mounting base; choose signal housing or lens parts for repairs to the electrically operated turn-signal lamp itself.

Not sure which part you need?

Send your model and year, plus photos of your existing part and any changes to the original setup.

Ask a fitment question

Your cart

×