My motorcycle Choose your Honda CB model

Search parts

Searching all Honda CB parts

Example: brake pads or oil filter.

Currently viewing Cables

Honda motorcycle parts

Choose your model and year to see parts listed for your bike.

Honda CB Speedometer Cable ~ Replaces 44830-425-870

$22.66 USD
51-2304
Replace your CB speedometer cable with this Speedometer Cable in black, replacing OEM #44830-425-870. End-to-end length 38.5". Made in Japan.Key Features• Speedometer cable, black•...

1979-83 Honda CB1100 / CB750 Tachometer Cable ~ Replaces 37260-425-000

$20.59 USD
51-2405
Replace your DOHC CB tachometer cable with this Tachometer Cable in black, replacing OEM #37260-425-000 / #37260-ME8-000 / #37260-MA5-670 / #37260-ME8-000. Made in Japan.Key...

Honda CB1000/CB900/CB750/CB650 Speedo Gear Plug

$43.95 USD
29-0538
Keep your speedo drive gear clean with this Speedo Gear Plug, 15mm outer diameter, 22mm long.Key Features• Speedo gear plug• 15mm outer diameter, 22mm...

1979 Honda CB750L Limited · Instrument Cables Buying guide

Match each instrument cable from end to end

The speedometer cable is specified at 38.5 inches end-to-end. The tachometer cable is listed separately; do not transfer the speedometer measurement to that different product.

Check both ends before buying

A matching outer finish does not establish cable compatibility. Compare the instrument end and drive end, then inspect the route for modifications or damage. A changed wheel drive or custom gauge can alter the correct cable choice.

Keep plugs separate from working cables

A drive plug is a different accessory from a cable transmitting motion to an instrument. Choose the actual service need before ordering. Use the appropriate workshop guidance for cable routing and instrument diagnosis rather than assuming every needle fault is caused by the cable.

Buying questions

Is the tachometer cable also 38.5 inches long?

That measurement is stated for the speedometer cable. Do not apply it to the separate tachometer product; compare the tachometer cable and its fittings directly when confirming an order.

Will the speedometer cable suit a custom gauge?

Check the custom instrument’s cable connection and drive requirement, along with the wheel drive and route. The Limited application alone does not prove a custom conversion uses the same cable.

Should I order a cable for a sticking gauge needle?

Inspect the instrument and drive as well as the cable. A new cable does not diagnose the cause of every needle problem, so establish the faulty component before buying.

Not sure which part you need?

Send your model and year, plus photos of your existing part and any changes to the original setup.

Ask a fitment question

Your cart

×